Marauder-CDN Posted February 20, 2012 Member ID: 1777 Group: ++ COD5 Admin Followers: 30 Topic Count: 50 Topics Per Day: 0.01 Content Count: 414 Content Per Day: 0.08 Reputation: 213 Achievement Points: 2989 Solved Content: 0 Days Won: 0 Joined: 09/09/10 Status: Offline Last Seen: January 28 Device: Windows Posted February 20, 2012 this is a very easy mod for Seagate Go-Flex external HD's with the removable base,un plug the base,when you look at it you see the typical SATA connectors,just take(if you have them) a spare SATA cable,try and plug it in..just a bit too short. At this point this is where I clamped the cable into a vise and pulled out my trusty exactor blade..a little of trimming,it fits. Do the same with a molex to SATA adapter and you have createdan external SATA drive..as long as you have spare SATA connectors on your mother board. The whole reason I came up with this was due to the fact my brother-in-law screwed his and had a crap load of data on it...I had one hanging around but USB was taking way to long with EASUS data recovery,the partition recovery was 39hrs, I did this and it dropped to 12. However one drive is hooked up internally..one Esata with an adapter I happened to have laying around.Plus the drives are connected to my home server computer and are sitting on the edge of the 140mm so they stay cooled...I have to copy the recovery files to the back unit to restore the front...pain in the butt Awards
Nutcutter Posted February 20, 2012 Member ID: 1540 Group: **- Inactive Registered Users Followers: 13 Topic Count: 40 Topics Per Day: 0.01 Content Count: 856 Content Per Day: 0.16 Reputation: 100 Achievement Points: 4812 Solved Content: 0 Days Won: 0 Joined: 06/28/10 Status: Offline Last Seen: May 6, 2017 Birthday: 09/20/1969 Posted February 20, 2012 I thought I was the only only one that left the cover off my PC permanently. I also see you left it out to hit with your foot and constantly remind you that you are a Modder
Marauder-CDN Posted February 20, 2012 Member ID: 1777 Group: ++ COD5 Admin Followers: 30 Topic Count: 50 Topics Per Day: 0.01 Content Count: 414 Content Per Day: 0.08 Reputation: 213 Achievement Points: 2989 Solved Content: 0 Days Won: 0 Joined: 09/09/10 Status: Offline Last Seen: January 28 Device: Windows Author Posted February 20, 2012 I always seem to have something ripped apart..but I chose to do this on the server this time rather affect my main system ..the beauty part of this mod is if you have the cabling it saves buying the the Seagate adapter..you go from USB to SATA and the transfer rate is way better. Modding wise ..on my system I ordered off of Ebay red led's and resistors and wired up my own lighting..the one I will display is my first ..but is rude looking that is why I never put it in..my later ones are all mounted Awards
Recommended Posts