KaptCrunch

and a air mattress for comfort NP just jazzing you

LaBob Maid's Quarter's there is none for the trailer only has 1 entrance you forgot home theater sound to go with big screen LoL. nice unit (but need more insulation in the walls for the snowmobiling. Note: the slide outs need silicone lube to help the leaks an keep it pliable) That's nice getaway TLB, bob is jealous

Storm Think of the fun times you had with her will pull you through Bro, My condolences

sure you and dot can handle the G-forces, sortta hard on the heart when floor it.

reporting for duty!

Correct then hardware/software or power source issues used same RAM sticks ? or power supply. Question you have UPS unit with AVR (automatic voltage regulation) ? mite have a dirty power source from the wall outlet or can borrow one to check. has anytime you hear static from audio output or room lighting go dim for second ? are signs of bad power source and grounding issues. other a bent pin on CPU socket, weak tension PCI-e pins, ditry ram contacts and wrong firmware/driver. has your Cat got jealous.... for your not paying attention to them and chew your cables? have seen this the case is warped/twisted, remove Motherboard from case and play a game to see if repeat issue.

MSI TOMAHAWK LOOK HERE look they dropped the REV on this MB tell me is that your MB in picture ? if is i see this AMD Chipset Driver7.01.08.1292025-01-2263.83 MB release date Jan 2 2025 Download their updater MSI Center and use it to check firmware

missing key Info, like motherboard model and the Rev:1.xx that printed near top PCI-e slot or a corner of MB Nycz Note you must match REV of MB for that is hardware venders change out of the MB model #, don't confuse bio's version to model for that is software. lets say you opted MB XZ3K and on Motherboard say Rev:1.00 and you think XZ3K Rev:2.00 is better update. what really happed Rev:1 was a chevy motor and Rev:2 was a Ford motor. you flashed the 2 into the 1 and the instruction to the chips are lost an only get a black screen, no post. other thing win 11 uefi bios and if using bit locker get your key recorded before any updating bios, its a long one 48-digit need that to run flash program. looks micro code for the cpu is out dated. Note: use MB own update app to check what is needed. M2 SSD go to manufactors site and use their software tools to check drive, Note: back up any data you want before run test program.

Sorry Pete the Blue is moving in that's Trudeau = Red tru-south who going down, what people do for money when cave era, you didn't have to pay rent how come now. TBB think were going conservative=Blue. same thing all are greedy snakes

NICE Shadow heads up 392 had lifters and cam issues, maybe why was sold if got it cheap nice project power update (SRT 392 is powered by a 6.4L V8 SRT HEMI MDS engine that generates 485-horsepower and 475 lb-ft of torque. The engine's power is directed to the vehicle's rear wheels via the state-of-the-art TorqueFlite 8-speed automatic transmission. production camshafts, 6.4L/392 HEMI engine has 286 degrees of intake and 288 degrees of exhaust duration, while the intake lift is . 571 inches and . 536 inches on the exhaust. about $700. for lifter and cam kit. ) than the old 1966 you have can do a oil analysis an see how much metal in the oil or open up engine.

in reality you just rent the Beer to wizz it down the drain

smokie N the Bandit got thier beer too LoL correct just random search for when working in labbat's brewery the vats were 1/4 hops and water the rest. now you know why they call Budweiser the wishy-wash beer for beach wood flavour. TTB good excuse to fool the wife.

The best breweries in the world can make 1 gallon of beer and washup with 2 gallons of water. The water use ratio in this case equals 2. In Montana, our breweries have water use ratios of 4 to 8. That means that every gallon of beer that is manufactured in Montana requires anywhere from 4 to 8 gallons of fresh water.

The maximum length of a Cat5e or Cat6 Ethernet cable is about 295 ft. (90 m), plus up to 16 ft. (5 m) of patch cable on either end, for a total of 328 feet or 100 meters. Beyond this, the signal begins to degrade, reducing the speed and reliability of the connection. OTHER CHECK IF CABLE IS STRAIGHT OR A CROSSOVER

cos they are boys playing with thier guns and when they go to war they name them so not think about what are doing with tools supplied from the government. R.I.P. Dolores O'riordan i vote Zombies

Guess i fell off the screen eerrr list and others

Cangrats Merlin thanks for careing of the servers.

Yes was Johnny Dos and crew, yeah great times then.

Rose thanks to AI now a days are worming in to Everything we do now for the greed machine whats to control you more and see you coming for them to toss them out of the house deceit ;). i think we need to de-digitalize ( toss the dam phone for is tracking you every move and listening). try this have phone off on table and say a word then open phone go to internet search engine an what you said will try to sell you that.

other thing how old is your GPU, may need a refresh the Thermal paste and pads for memory if have them. the overheat will slow down the GPU. Note if no memory pads be careful of paste not to get on connections, just the ceramic of the chip. if do when boot back up will have a 4bit looking screen. will have wash good with ISO alchol and many Q-tips.

That's good to hear, plug N play. had to ask for early hardware had to manual install monitor inf. Weed use bink radtools will sharpen the image and colour of your games, CoD uses bink.

Gee Weed see you still playing atari space invaders LoL what does the Nvidia control panel report on the G-sync status

Scotch Tape that is for Key to wrap his lips up, Key those hours to pay IRS and ex's LoL

let me get out my crystal ball and it will tell me the date LoL Note weekends please oops missed the time banner Saturday february 8th - 14:00 EST/ 19:00 UK / 20:00 CET/ PM. count me in 2pm on this side of the Ocean thank you Essssieeee for your due diligence getting this off the ground

silly question have you removed the protective film off the cooling block ? for seen that with other peoples first build. Yes air flow through the case is important and specially if water cooling. for all the air pockets move them out of loop, as you know water is heavier than air. if can get use of infared thermometer to check for hot spots. like heat sink not hot at all means the film is still on bottom.