KaptCrunch

Shamu what your asking ? if have cable modem how to get wifi ? or this a servey on what members use ? cable or wireles internet

Coolmd you can D/L Cpu-Z to find what motherboard and memory models

yeah had one burn up on from logitech. the control fob melted, sound was for ever greating louder and dam mic kept muting

just get current audio drivers im on w7-64

Simplemod under what OS ? have current audio drivers for your usb headset, sound card/chip works fine for me with W7

TS relies on windows for it will set up that have set when open TS, yes can adjust levels within TS but checks windows when TS.exe

a guide for you to adjust and test your Micophone for gaming, for what you hear while testing is what other players hear I had to get another mic for the USB one died on headset (plugs in red 1/8 port rear MotherBoard

No mate......was another £10....and didnt want the bloody game anyways.......card dont arrive till tomoz..... WHEN IT ARRIVES don't open package till you remove the old video drivers and use windows default vga driver ( booting a few times ) and remove any video card/driver software in remove programs from control panel once that is done then go to nvida site and d/l current driver for your OS (32 or 64 bit)? then save to desktop if onboard video..."disable video" need reboot required to set in CMOS that slot is boot video default or shut down remove old video card then install newcard and its power connections making sure that are the PCI-e power from PSU cables not 12Vesp once that done then boot and exe your drivers on desktop

i see P5G41T-M LX has 11 bios updates with bios version BIOS 1101 current with a ton of system improvements NOTE: read all about bios flashing in dos to update your bios. if done wrong you have a paper weight till you replace bios chip other is your CMOS battery is dead , not keeping setttings over night an no video is due to the MB is doing video not your Ati card video

what version running

ERM good question I know it is a 850w so I am not sure about the 12v 40 amp bit......although if ohms law is right w=iv then I think it is ok....but i am not sure if it applies.... most will have a sticker stating the values for the outputs

CoolMD also whats PSU you have ? does it have 40amp 12v rail support

i see that the 4gb sets wern't tested but the 2gb sets were of the same brand

if realtek sound they just released driver for w7 64bit seens fixed sound / mic issues

\ wow 2868 ping

ah i see say blind man.. the bios version 1.50 is the one MB should have for get the most out of cpu, use dos to update and for memory list here to lookup if your matches thiers then just go to memory site to get timings Thor and he needs a degree wheel to dial in that camshaft lol he got dual quad carb for his MB

played just now seems HDD or MEMORY issues with that server, seeing one of the array drives failing cosing all this havoc. to rule out hardware place DM on another machine, still same issues then its software related

ram site or most are timings listed on the ram it self dean what brand of MB an model#

seems to me that ci's issue are the servers problem due to failing hardware i noticed the console is turned on in cod5 DM server

also check your MB site for QVL.pdf (qualified venders list) an match up your ram to your MB

USE A GROUNDING STRAP OR TOUCH METAL B4 TOUCHING ANY HARDWARE READ the MB MANUAL cover to back 1) get all CURRENT updates (sound, chipset, video) for your new MB burn to a disk also check the bios is current and if need an update do it in DOS boot only not a window 2) get the info for your RAM (timings) for setting up in cmos after all hardware/firmware updated 3) you didn't say if cpu was mounted already if not get good thermal paste and check all clearances b4 applying paste Note some heatsinks come with a thin film to protect while shipping REMOVE it if have

boot game then go in to OPTIONS then "game option" select console to on hit tilde key left side of 1 then type in console "/+activate"

i was getting error #102 bd_exception_in_db then says key already inuse when tried SP mode all is good today just had to reset PB and servers list

remove cmos BATTERY,cards cpu and fill the sink up with hot soapy water and soak then reinse off then blow dry water off then place in a oven NOTICE: set oven to lowest setting 120f bake for 2 hours then turn off oven and let it cool off 5 hours do same with video card if gotten juiced too (remove fan) then try to starighten out cpu pins by a safety pin and magifing glass