KaptCrunch

sue before building new make a current WHQL drivers disk/flash for all your new hardware MB video first update bios to current in DOS mode not windows, have someone who done a DOS bios flash help you if not done before. current M5A97 BIOS 0901 for new MB Improve syatem stability. 2011.12.07 memory timings 9-9-9-24 memory voltage 1.5v BOOT in safe mode and go to device manager and uninstall (NOTE do not restart when asked) display adapters, xxxx controliers, network adapters, sound then delete all old MB hardware in system devices folder restart have drivers disk/flash you made earlier place in when asked and point to folder on disk/flash add a case fan in lower front that draws the air into case

lijkt erop dat ook zij, uw tekening te veel macht met drie systemen op dezelfde lijn voor niet genoeg watt voor alle 3 computers probeer het gewoon een systeem op Wallpower outlet seems that may be, your drawing too much power with 3 systems on same line for not enough watts for all 3 computers try just 1 system on wallpower outlet

psu should fit what about getting 850 for when go 2 video cards note crossfire with matching GPU Nvidia works better then amd

Gump Power supply is a little small and the sound card is too old.Audigy se is not that great with Windows 7 second that psu sound card sux the MB sound is better then that card (note mite be hiding that MB sound doa) Sue check bios version current is M5A97 BIOS Ver: 0901

MS just released a update for amd BD -------> FIX

sounds if not enough air change in case

the 570sc is a ref design, the 580 waterblock will fit go with corsair H100 and cool 2 GPU's missing something.......yes 60" 1080p 240Hz screen and long HDMI 1.4 cable can pick up a good deal on screen/moniter this time of yr

yes thats the way to do it , but get current WHQL drivers for hardware for new drive, use the F6 option to install OS if plop in new cpu will toss a registation nag screen and have to call MS for a new KEY , a 10 minute call and your done then transfer over files off old drive

tsw 8.5 Now that you are all done copying me ..i told you it would kick ass ..the things that you got in that rig are all good parts ..and you will have many hours of fun ..glade i could help you out with it ..remember to post some pics nice setup but i see case is Ho2 ready......can remove heatsink an add water block on gpu's to squeaze more FPS

hold it a minute the connector you want is PCI-E 6 wire or 8 wire ,,,,,,,,,,, NOTE the motherboard 8 wire power will fit in video BUT IS NOT SAME for it will smoke the card for polarity is reversed Dean what motherboard have? best get a manual and can you list what have on MB and PSU model

Yes that is the issue Replace batt for it keeps settings and clock time

OC'n there is a price to pay save your money on 8 core hardware for there is no software written yet to use its potential amd has more bang for the buck then intel

other is AC~ power source when getting into high wattage systems use a power conditioner like smart-UPS and a dedicated power line from fusebox also if power drops your still playing and protects from brown-out

yes first up date to current bios for your MB then get hardware drivers that are WHQD appoved for your OS 32 or 64 bit? lan, sound, usb, graphics, chipset, raid software (F6 option) and put them on a stick or optical disk for later in bios set to raid and have optical boot first, then reboot put win7 in drive hit F6 to install drivers when asks then put in your disk made prior note: raid is really for protection of data loss

missing the most important part of the system..... PSU 750watt an up an gold cert

yes Hawkeye56 knows computers for fixed mine over TV

i get that but the bent pedel wasn't allowing the master cly to work correctly

yes for master cly is the issue for the return bleed hole covered causing hyd lock making the slave extend but not returning max'ed out and bent rod note installers master cly needs free play too so bleed hole can work within cly best way to get best clutch adjustment on a hyd system make push-rod on slave adjustable by cutting rod in half (and remove total length of bolt n nut) add in middle long nut and bolt with a lock-nut (grade then weld to each half or slot the slave mount holes

Damage_inc- overclocking = over rated. but have fun overheating and paying for it. only the fearless venture watercooling, but water is ahead of air cooling efficency as you know water and electricy don't mix mind you water cooling isn't for everybody cause is always a better idiot when comes to assy them and have leaks overheating = insanely over doing it with OC /OV, under normal use is fine, yes too much heat kills hardware make case is well ventulated (air changes within case and side panels on)

did you claen your CDrom

what OS using ? sounds admin right issue or directory location

they released WHQL drivers for Gforce cards get your update

call MS and re-issue a new key, any hardware upgrades ? i've had that happen with new video card installed LINK http://support.microsoft.com/kb/950929/

Chris what hardware you have ? the copy of game a US or UK version (UK pal /US ntsc)

Was looking in my folders of the game and noticed that were extra files win7-64 boot drive C:Users/yourself/AppData/Local/Activision/CodWaW/ mods players usermaps servercache.dat --------------------------- players folder /profiles /your user mods,save folder and files config_mp.cfg, config.cfg --------------------------------- mods folder /xinam found extra of mpdata mpdatabk0000 were same file and written in asian code just kept one of mpdata --------------------------------- save folder empty -------------------------------- usermap folder this were all maps go if to many will crash out when game changes maps check for copys of same or delete (burn to disk for future re-installs) files that aren' used