Do You Vape Or Use Ecig?

[JohnnyQuest]

Got my shipment today. Woots. should have plenty of juice for awhile, 8 different flavors to check out also.

i say the tank is ok. the clear tank leaked cause of a flaw at the end of it, but it did come with an extra one and used some 600grit sandpaper to fix and smooth out both, leak stopped!

got the SS wick and coil working 1st try , great vapor and taste!

 

 

 

nice stuffs you got there Hemps man...looks like you got the vape bug hard like the rest of us...i think though you will agree ,,you have to find the right juice...i got one today that tastes like ass..might have to let it steep...but if it doesnt get any better in a week..then it goes on the vape if i have to shelf..lol..z-atty still isn't in ...maybe they are out of stock or something but an e-mail would be nice...,, i'm going to take some pics tommorrow if i can remember what i did with my camera..i see you didn't use the little hole in the one post...Baddger did the same thing...that little post with the hole in it is for your negetive end...my dud is the same just unscrew the little screw so that the wire can start there...then tighten the little screw down to anchor the negetive end...i did the same thing as you and Baddger Hemps...i watched the vids and it didn't show any with the little post so i figured the one screw on the base was the negetive...until i discovered the little hole in the one post...so i went online and thats what it is for...but if its working for you don't change it...i know Baddger left his the way he made it.. but if she's a vapin don't bother knockin...he he,you will have to change the screw on the base and leave one open...the one without the threads inside is for the wick the other one i just left out...it wicks better i think,plus you don't have to unscrew the screw to fill it.

Edited February 5, 2013 by JohnnyQuest

[ChknFngr]

u dont have a hot spot between the mesh and the center post ? looks like u got lots of space there.

[Hemps]

ChknFngr, on 04 Feb 2013 - 21:28, said:

u dont have a hot spot between the mesh and the center post ? looks like u got lots of space there.

i did make the coil fit closer after that picture of it. The part of the wire at the top of the wick burned up, so i had to unwrap one coil to get it to pos post again but after that all good. Turned down the volts from 3.4 to 3. (Only got a short piece of wire with it, but it worked fine with 4 wraps around wick.

That other set screw thing that i didnt use is for the silicone wicks u can use with it, and there is a screw that u cant see in the pic that i removed for venting. I think you wouldnt have the room to make the wire coil if u used that set screw with the little hole. Going to need to order more screen and wire,only got one more set up left.

Put a sample flavor (paradise) in a ce4 cart and liking it, you can taste the banana in it. Yummmm. 7 more flavors to try

Edited February 5, 2013 by Hemps

[JohnnyQuest]

Here's my setup gang...just waiting on the z-atty pro

 

Can't upload my pic....will try again...damn

pic is too big...anyone?

Edited February 5, 2013 by JohnnyQuest

[JohnnyQuest]

still didn't work...geez...must be too big or some shit

Edited February 5, 2013 by JohnnyQuest

[coolmd]

still didn't work...geez...must be too big or some shit

 

HEY THATS WHAT MY WIFE SAYS.......lol

[JohnnyQuest]

 

still didn't work...geez...must be too big or some shit

 

HEY THATS WHAT MY WIFE SAYS.......lol

LMFAO,,,,thats some funny shit Cool man......thanks i needed that....i have the photo uploading blues....got a nice pic and can't even post it...damn..

[Hemps]

 

 

still didn't work...geez...must be too big or some shit

 

HEY THATS WHAT MY WIFE SAYS.......lol

LMFAO,,,,thats some funny shit Cool man......thanks i needed that....i have the photo uploading blues....got a nice pic and can't even post it...damn..

 

are you doing it right?

 

first hit this little button

 

 

then hit upload

 

 

then browse

 

 

then  pick you pic from you file and double click it and hit send to server

 

 

then your done.  Idiot!!

[coolmd]

WOW WISH I COULD EXPLAIN THINGS THAT WELL>>>>>>

 

HEMPS lovin the setup...whats your battery mod called?

[Hemps]

WOW WISH I COULD EXPLAIN THINGS THAT WELL>>>>>>

 

HEMPS lovin the setup...whats your battery mod called?

its OVALE  eVic      or joyetech eVic  http://www.joyetech.com/product/eVic.php

Edited February 5, 2013 by Hemps

[JohnnyQuest]

 

 

Damn it worked....but its too small...lol anyways that's it gang...just waiting on my z-atty pro

[JohnnyQuest]

 

 

 

still didn't work...geez...must be too big or some shit

 

HEY THATS WHAT MY WIFE SAYS.......lol

LMFAO,,,,thats some funny shit Cool man......thanks i needed that....i have the photo uploading blues....got a nice pic and can't even post it...damn..

 

are you doing it right?

 

first hit this little button

 

 

then hit upload

 

 

then browse

 

 

then  pick you pic from you file and double click it and hit send to server

 

 

then your done.  Idiot!!

i am nominating you for a help medal as well Hemps man...thanks it worked

[Hemps]

 

 

Damn it worked....but its too small...lol anyways that's it gang...just waiting on my z-atty pro

Nice!

[JohnnyQuest]

 

Thats a better pic..

[ChknFngr]

nice,

so u got 2 vivi novas on the provari and the smok, but what are those two on the right ?

[JohnnyQuest]

they're called f-16 tankomizers..and they suck...the replacement carts never work...cheap dual coils or something...they taste burnt all the time..and i ordered five replacement carts and four of the five were duds..didn't work at all..they work now but they taste stale..i've  had them for a month or so ..they worked good at the start but once they wore out the replacements sucked so now they are orniments

[ChknFngr]

ty for the info.

im still searching and hesitate between a few systems hmm

one thing is sure is that i wanna try something else like, but everything i find interesting is out of stock everywhere ... or isnt released yet

[coolmd]

 

 

Damn it worked....but its too small...lol anyways that's it gang...just waiting on my z-atty pro

OMG...NICE

[JohnnyQuest]

Thanks Cool,,,you're the one that got me addicted to this hobby...thank Christ,,And Chkn...i'm going to try one of these next order..they have a couple reviews by vivi nova users..so i might get one and a few replacement bottom coils..[who knows maybe i can find a way to rebuild them too...lol],,

 

http://www.vapoursolutions.com/VAPEONLY-BCC-BOTTOM-CHANGEABLE-COIL-MEGA-CARTOMIZER-35ml-SILVER-BODY_p_1056.html

 

not too pricey and might be good..

Edited February 6, 2013 by JohnnyQuest

[Hemps]

 

Got my shipment today. Woots. should have plenty of juice for awhile, 8 different flavors to check out also.

i say the tank is ok. the clear tank leaked cause of a flaw at the end of it, but it did come with an extra one and used some 600grit sandpaper to fix and smooth out both, leak stopped!

got the SS wick and coil working 1st try , great vapor and taste!

 

 

 

nice stuffs you got there Hemps man...looks like you got the vape bug hard like the rest of us...i think though you will agree ,,you have to find the right juice...i got one today that tastes like ass..might have to let it steep...but if it doesnt get any better in a week..then it goes on the vape if i have to shelf..lol..z-atty still isn't in ...maybe they are out of stock or something but an e-mail would be nice...,, i'm going to take some pics tommorrow if i can remember what i did with my camera..i see you didn't use the little hole in the one post...Baddger did the same thing...that little post with the hole in it is for your negetive end...my dud is the same just unscrew the little screw so that the wire can start there...then tighten the little screw down to anchor the negetive end...i did the same thing as you and Baddger Hemps...i watched the vids and it didn't show any with the little post so i figured the one screw on the base was the negetive...until i discovered the little hole in the one post...so i went online and thats what it is for...but if its working for you don't change it...i know Baddger left his the way he made it.. but if she's a vapin don't bother knockin...he he,you will have to change the screw on the base and leave one open...the one without the threads inside is for the wick the other one i just left out...it wicks better i think,plus you don't have to unscrew the screw to fill it.

here's a video of using a silicon wick in the aga-t 

 

 

Edited February 6, 2013 by Hemps

[coolmd]

I tried the silica wick in my rebuilable thingy but found it didint wick enough even with 3mm silica....the mesh actually worked better....

 

I have just found a new bottom coil rebuilable tank atty which I have ordered...looks very easy to build the coils...I,ll let you know.....just gonna try to add a link so you can have a look...

 

http://www.health-e-vape.co.uk//new--ss-dominator-tank---rebuilable-clearomizer-tank-system-in-stock-3154-p.asp

[JohnnyQuest]

Looks like fun Cool...i get my z-atty on Mon.I will let you know how it works.

[Hemps]

here's yet another device ive found out there, saw it at mountain oak vapor as a new item....http://www.mountainoakvapors.com/Terminator-C-Rebuildable-Atomizer-Tank-p/terminatorc.htm

 

here a video about it also

 

[Hemps]

im going to be ordering some wire and ss mesh, wondering what you guys recommend what sizes i should get? can't say for sure what mesh/wire they gave me with my AGA-T, but ive been using 70% PG/ 30% VG juice and the choice of wire is-

 

Wire Gauge- 28 AWG
Resistance- 5.6 ohm/ft 16.8 ohm/m.
Wire Diameter- 0.32 mm.

Wire Gauge- 30 AWG
Resistance- 8.3 ohm/ft 24.9 ohm/m.
Wire Diameter- 0.26 mm.

Wire Gauge- 32 AWG
Resistance- 14.53 ohm/ft 43.6 ohm/m.
Wire Diameter- 0.008" / 0.20 mm.

Wire Gauge- 34 AWG
Resistance- 26.7 ohm/ft  8 0.3 ohm/m.
Wire Diameter- 0.16 mm.

 

and the ss screen

 

316 SS Wire Cloth Woven 325 x 325 Mesh with a .0014" wire diameter

-----------or-----------

316 SS Wire Cloth Woven 400 x 400 Mesh with a .0014" wire diameter

 

Thanks !

Edited February 9, 2013 by Hemps

[coolmd]

im going to be ordering some wire and ss mesh, wondering what you guys recommend what sizes i should get? can't say for sure what mesh/wire they gave me with my AGA-T, but ive been using 70% PG/ 30% VG juice and the choice of wire is-

 

Wire Gauge- 28 AWG

Resistance- 5.6 ohm/ft 16.8 ohm/m.

Wire Diameter- 0.32 mm.

 

Wire Gauge- 30 AWG

Resistance- 8.3 ohm/ft 24.9 ohm/m.

Wire Diameter- 0.26 mm.

 

Wire Gauge- 32 AWG

Resistance- 14.53 ohm/ft 43.6 ohm/m.

Wire Diameter- 0.008" / 0.20 mm.

 

Wire Gauge- 34 AWG

Resistance- 26.7 ohm/ft  8 0.3 ohm/m.

Wire Diameter- 0.16 mm.

 

and the ss screen

 

316 SS Wire Cloth Woven 325 x 325 Mesh with a .0014" wire diameter

-----------or-----------

316 SS Wire Cloth Woven 400 x 400 Mesh with a .0014" wire diameter

 

Thanks !

Hiya Mate,

I would use the 32swg wire as whenever I tried the thinner stuff...it seemed crap.......mesh I am not sure as the stuff I brought was 500 mesh and crap..I mainly use PG higher stuff...believe 500 is only good for VG rich juice.....so my advice would be the 325...but see what the others think....