J3st3r

HAPPY F U Day Dog Dick! lol

I nuked my neighbors Dog Kennel because the damn dog is always barking but it didn't help.

R9 280X (which is a rebadged Radeon HD 7970 3gb) card 20% bottleneck with a FX-8320 Eight-Core clocked to 4.7ghz. Kinda figured that. Can't afford another card. Fucking Bitcoin farmers.

EnglishBOOB and WildThong together? Oh My lol Bet you 2 had a blast. Who's chicken was getting choked?

lol

That sure does look like @YACCster lol

Welcome back sweety

I believe Frenchi. I bet you were repetitively anal probed by aliens. Come on just admit it lol Welcome back ChilePenis Missed ya bro.

Happy Birthday AzzMunch

Come on show us some Leg

BOOOBIES!!!!!

Hello no. There is very very little strength in a board that's turned sideways. That bottom board is the Seal plate. A seal plate is usually Pined or bolted to the foundation and the Joists are nailed to the seal plate. There needs to be some sort of Header installed since it is definitely load bearing. And a Reinforced Concrete Lintel will not be enough to hold that kind of load. 3 2x10s glued and screwed or glued and nailed together and 6" to 8" (or more if you want) wider than the opening. Use 3 2x10s minimal. Use 3x12s if you have room to get them in. That's ALOT of weight up there. An average sized fireplace and chimney can easily weigh 5 ton+ and that's just for the Brick work. Here this will help you Alot. Skip down to where it says Step 1. It's a bit of work but it will save your fireplace and chimney from crashing through the floor. Looks like you have some water staining on the joists. I would call someone in and have them inspect the brickwork after you jack up the floor and install the header. Brickwork can be resealed if they are not to bad. https://www.oneprojectcloser.com/how-to-replace-a-load-bearing-door-header/ I was a licensed and insured contractor before I got hurt. Me and my 5 man crew did the Framing, roofing, plumbing, electric and kitchen installs. My boss and his small 3 man group were the Masons. They did the foundations and concrete and stone work and driveways and sidewalks. Then we had a 6 man Finishing crew that did all of the pretty stuff like insulation, drywall, flooring, paint, trim and siding. We contracted out the HVAC stuff for insurance purposes.

The Licensed Guided Double Decker Tour is absolutely epic. We were on the top floor which has no roof. Just make 100% sure that it is not going to rain and bring plenty of Sun Block. Save up a few bucks and do it. It will be the most memorable thing you do for a long time. http://www.gettysburgbattlefieldtours.com/gettysburg-tours/gettysburg-tours/licensed-guided-double-decker-tour/ Last time I did the tour I was 14 years old and went with the whole family including my Grandpa and Grandma. I still remember most of that trip like it was yesterday and that was 32 years ago. It takes 3-4 days to see everything so plan on staying for the week. You will not regret it. There are wooded camp grounds all over the place about 5 miles south of Gettysburg. Perfect for a motor home or travel trailer or even a large tent. If I go again I'll be camping out in a tent and I'll be bringing my scooter. A bit to much to walk everywhere and traffic can be ridicules especially around the 4th of July up untill Oktoberfest. lol THIS might be fun if ya have a place to pass out. Hmmmmm Possible XI Fest Location? Gettysburg Brew Fest 2018 Aug 18 Held on Seminary Ridge Battleground https://www.eventbrite.com/e/gettysburg-brew-fest-2018-tickets-40855740620?aff=es2

We were supposed to go Out West with my grandpa on one of his big hunting trips that summer. Never did make it out there. Grandpa passed away in 84. We did make it up to Canada in time for Salmon that year though. It was an awesome experience.

SAMs Targeting and taking out care packages with 1 shot in mid air IS NOT COOL. Care packages are a Kill Streak reward. Get rid of All of the other Kill streaks while your at it To be Fair. I was quite angry when the damn SAM launcher blew up my Care package AND my Attack Package in mid air. 8 kill streak for nothing And nothing that I could do about taking out the damn Sam launcher because it was the whole way across the map in the back corner some where. boycott the SAMs ability to shoot down care packages. It's BS and so is that explosive bolt shooting 20 round Pistol. That thing needs to go in the Inventory section with the other Tubes. It is a close range Tube Launcher that you can fire from 1 foot away and kill an enemy without killing yourself.

lmao

Thanks peeps. Happy B-Day to me wooohoooo Same crap different year bla bla bla Frenchi Fault lol.

Post more and we'll see about a more permanent solution to you getting redirected bud. https://www.xtremeidiots.com/membership/

Hmmmmm' Whacking off again Wiggles?

Hey hey hey that's my Job description. lol Welcome to the forums.

Talked to him in game and he said it does the same thing with a different keyboard. I am stumped which doesn't happen very often. Maybe windows default keyboard is something different from US QWERTY ? Just guessing here but it may be worth looking at. Here's how to check. Go to Settings and click on Time and Language. Then click Region and Language and tap where it says English US and hit the Options button See if US QWERTY is the default keyboard it should look like the 3rd pic if it is. If US QWERTY is NOT the default keyboard Click Add a Keyboard and select US QWERTY and Delete the other keyboard.

One of your 2 CTRL keys might be stuck down. CTRL+ESC does the same thing as the windows key. Try popping the key cap off of both CTRL keys and clean them. That's either a problem with your keyboard or your keyboard software since it's Tabbing out of the game and opening up the start menu. I'm 99.9% sure there is no way a bind can tab you out of the game and opening the Start Menu lol. Betting on stuck key. Spill anything sticky on or near your keyboard lately? Beer? Coffee? Soda? 1 small drop is all it takes.

Several problems and solutions that I have learned over the years. CPU not properly seated will do that. It might see all 16gb of memory but only use a portion of it. When I build a New PC I put the CPU in the socket and clamp it down. Then take it back out and clamp it back down. I'll do this a couple times before I put my thermal paste on and bolt down the cooler. Lightly press down on the CPU while you lock it down the last time. AMDs memory controller is on the CPU so if it's not seated correctly it will cause all types of problems. 1st gen socket 939 and AM2 were notorious for not seating the 1st couple times. You could not just pop it in and go unless you were really lucky lol. Motherboard could have a faulty memory channel. I've had to RMA quite a few mid priced motherboards lately for PCs that I have built for people. CPU could be faulty but that rarely happens these days. Memory compatibility should Not be the issue since you are running the correct speed of memory for the motherboard and that memory is 1.2v. If memory voltage is higher than 1.5v you have to set the voltage up manually. You have Bios Version 3803 which is the latest version. Here is what I would do if you still have problems after Re-Seating the CPU. This is going to take hours but it's the only way to test both the memory and motherboard. This is your motherboard. I marked Channel 1 in Blue and Channel 2 in Orange. Step 1. Install 2 memory modules in channel 1 and load into windows and run Windows Memory diagnostics. Click Start, type mdsched.exe in the Search box, and then press Enter. Choose whether to restart the computer and run the tool immediately or schedule the tool to run at the next restart. Let it run untill it's completely done. If errors are displayed Replace memory. Step 2. Pull those out and put the other 2 in channel 1 and test again. Step 3. If no errors were detected Repeat the tests above on Channel 2 If you get errors in 1 channel and not the other you will have to RMA the motherboard. I know it sucks testing 4 sticks of memory in 4 different slots because it takes forever but that's the only way to test all 4 memory modules and all 4 memory slots. Hope this helps.

Looks pretty good. This is the same Developers that made the Free Insurgency Mod for Counter Strike Source. That was a really fun mod but it did not have very many maps. There full game had 16 maps after all the patches and updates. IMO That's not enough maps to keep people interested for more than a few months. Day of Infamy is another game that they made. It's a WW2 shooter. $20 on Steam. Anyone tried it? http://store.steampowered.com/app/447820/Day_of_Infamy/

Update: Ok well it plays the 1st 4 maps twice then continues on with the other maps