KaptCrunch

WiZiD np thought you was green i see your a vet. anyways a good tip for starters

just a note on water cooling first dry fit the loop and not use T.I.M. when mounting water blocks get your hose lengths correct (no sharp bends) use a good hose and have pump at the lowest point in loop with a rez above pump try to have rad/s in self bleeding position eg. if flat have barbs on top if standing up have barbs top, on edge don't matter once have all fitted then remove water blocks and hoses still connected and rest of loop remove out of case and fill loop to test for leaks and run pump for 24hrs once done testing drain and install in computer case if have any questions ask me

where is the crack on the head or block, if block then its awhole motor fix heres a shop manaul for bf130.pdf if were me i'd find where is cracking and have a machine shop make a cyl thicker in crack area or take to welding shop that does tig welding if in water jacket area points to thermastat failure or timing to late causing overheat

if use STP cable is no issue with interferance, the cheap UTP cable means is unshielded so IF will occure. good to hear the flushdns worked for you Nobodygood

found a 5 port for $45.oo dell

sounds if your moniter cable is crap from white now to green screen or the video card is pooched (solder melted out socket) try removing the video card and use a known good one

yes Mean Dean is coorect don't go poking around in moniter for you will get hit by 3-5kv's flash light against screen beers if you hear your windows music means your @ login or desktop

get a flash light and shine one screen @45-60 angle to see if you see desktop , sounds to me that your back light in moniter died

here is the nVidai driver page to keep your graphics drivers up to date current is 306.23

as to the white out is call alchol poisoning just add some distilled water (60/40) in your drink all jokes s side do you get a boot screen at all

yes check your moniter on another system as to atx PSU pinout

sounds if torque converter lockup stays engaged when its should release around 40 k and lower as loader suggested brake pedal switch an check trans speed sensor is working with lights on same time maybe cable adjustment or trans TCM module failure

use an old speaker magnet on a string, then mine sweep your loosing area or have handy when screwing around computer

Dean do what i did got myself a long HDMI cable and hooked to to my 46" TV

labob if you own the home best is wired via running cables through the furnace ducts if you don't want to drill any hole in the home get a D-Link 16-Port Rackmountable Gigabit Switch DGS-1016D its Unmanaged switch, there around $150 new. its the easy way to get all hooked up, if want a surcure network then its more money for a managed switch

hell ShadowLady thats why they invented mud flaps so your doors don't stoned to death best way to fix that is get yourself some longstrand fiberglass pre-mix from ole crappy tire i see that they don't offer the pre-mixed fiberglass with long strand, the kit can do you also need a grinder with 24 grit disk and sander with 80 80,120, grits for primer and 400 wet paper for color match paint to complete repair SAFETY:goggles, gloves and dust mask grind the hole edges (1 inch back) to bare metal with grinder then get fiberglass mat if used that kit and cut mat to fit over hole and bare metal or if got the pre-mixed stull just add harder to can and stir then apply to hole and shape it so less sanding then let fiberglass set after sand with 80 sander then prime with primer paint then 120 then prime let dry between and one coat of your color then let dry then 400 wet paper then finish coat

manual.pdf thats for your cable modem , ok i see that your using linksys router with wifi ? from your computer open a Dos command dox and type " ipconfig " and see that the default gateway matches comcas modem 192.168.100.1 or the linksys router 192.168.1.1 best get manual also for linksys router and see what you can manage ithinks your connection path is cable modem/rj45/linksys router with wifi/computer ? and wireless is open (no password needed)

Wireless Gamepad F710 wireless gamepad mayhave to setup keys for some games have no maps

Shamu sorry the text you used in your post don't show on my screen unless i copy and paste in word your best bet is find out your modem users password and login in your router and check logs or setup offending IP with a password in router , so you can moniter it by you login for user. can you tell me the router your using brand? model?

Xtreme if have onboard sound update its drivrs and use your headset with it

Shamu what your asking ? if have cable modem how to get wifi ? or this a servey on what members use ? cable or wireles internet

Coolmd you can D/L Cpu-Z to find what motherboard and memory models

yeah had one burn up on from logitech. the control fob melted, sound was for ever greating louder and dam mic kept muting

just get current audio drivers im on w7-64