KaptCrunch

yes check your moniter on another system as to atx PSU pinout

sounds if torque converter lockup stays engaged when its should release around 40 k and lower as loader suggested brake pedal switch an check trans speed sensor is working with lights on same time maybe cable adjustment or trans TCM module failure

use an old speaker magnet on a string, then mine sweep your loosing area or have handy when screwing around computer

Dean do what i did got myself a long HDMI cable and hooked to to my 46" TV

labob if you own the home best is wired via running cables through the furnace ducts if you don't want to drill any hole in the home get a D-Link 16-Port Rackmountable Gigabit Switch DGS-1016D its Unmanaged switch, there around $150 new. its the easy way to get all hooked up, if want a surcure network then its more money for a managed switch

hell ShadowLady thats why they invented mud flaps so your doors don't stoned to death best way to fix that is get yourself some longstrand fiberglass pre-mix from ole crappy tire i see that they don't offer the pre-mixed fiberglass with long strand, the kit can do you also need a grinder with 24 grit disk and sander with 80 80,120, grits for primer and 400 wet paper for color match paint to complete repair SAFETY:goggles, gloves and dust mask grind the hole edges (1 inch back) to bare metal with grinder then get fiberglass mat if used that kit and cut mat to fit over hole and bare metal or if got the pre-mixed stull just add harder to can and stir then apply to hole and shape it so less sanding then let fiberglass set after sand with 80 sander then prime with primer paint then 120 then prime let dry between and one coat of your color then let dry then 400 wet paper then finish coat

manual.pdf thats for your cable modem , ok i see that your using linksys router with wifi ? from your computer open a Dos command dox and type " ipconfig " and see that the default gateway matches comcas modem 192.168.100.1 or the linksys router 192.168.1.1 best get manual also for linksys router and see what you can manage ithinks your connection path is cable modem/rj45/linksys router with wifi/computer ? and wireless is open (no password needed)

Wireless Gamepad F710 wireless gamepad mayhave to setup keys for some games have no maps

Shamu sorry the text you used in your post don't show on my screen unless i copy and paste in word your best bet is find out your modem users password and login in your router and check logs or setup offending IP with a password in router , so you can moniter it by you login for user. can you tell me the router your using brand? model?

Xtreme if have onboard sound update its drivrs and use your headset with it

Shamu what your asking ? if have cable modem how to get wifi ? or this a servey on what members use ? cable or wireles internet

Coolmd you can D/L Cpu-Z to find what motherboard and memory models

yeah had one burn up on from logitech. the control fob melted, sound was for ever greating louder and dam mic kept muting

just get current audio drivers im on w7-64

Simplemod under what OS ? have current audio drivers for your usb headset, sound card/chip works fine for me with W7

TS relies on windows for it will set up that have set when open TS, yes can adjust levels within TS but checks windows when TS.exe

a guide for you to adjust and test your Micophone for gaming, for what you hear while testing is what other players hear I had to get another mic for the USB one died on headset (plugs in red 1/8 port rear MotherBoard

No mate......was another £10....and didnt want the bloody game anyways.......card dont arrive till tomoz..... WHEN IT ARRIVES don't open package till you remove the old video drivers and use windows default vga driver ( booting a few times ) and remove any video card/driver software in remove programs from control panel once that is done then go to nvida site and d/l current driver for your OS (32 or 64 bit)? then save to desktop if onboard video..."disable video" need reboot required to set in CMOS that slot is boot video default or shut down remove old video card then install newcard and its power connections making sure that are the PCI-e power from PSU cables not 12Vesp once that done then boot and exe your drivers on desktop

i see P5G41T-M LX has 11 bios updates with bios version BIOS 1101 current with a ton of system improvements NOTE: read all about bios flashing in dos to update your bios. if done wrong you have a paper weight till you replace bios chip other is your CMOS battery is dead , not keeping setttings over night an no video is due to the MB is doing video not your Ati card video

what version running

ERM good question I know it is a 850w so I am not sure about the 12v 40 amp bit......although if ohms law is right w=iv then I think it is ok....but i am not sure if it applies.... most will have a sticker stating the values for the outputs

CoolMD also whats PSU you have ? does it have 40amp 12v rail support

i see that the 4gb sets wern't tested but the 2gb sets were of the same brand

if realtek sound they just released driver for w7 64bit seens fixed sound / mic issues