-
Posts
5263 -
Joined
-
Last visited
-
Days Won
25 -
Donations
0.00 USD -
Points
217,362 [ Donate ]
Content Type
Profiles
Forums
Gallery
Twitch
Running Commentary
Events
Store
Downloads
Everything posted by J3st3r
-
Flat like @TheHammers head after this chic V-Baggs him.
-
You might literally need to blow the cobwebs out. Constantly Driving like a 80 year old grandma will carbon up O2 censors. They have to get hot and stay hot for a while just like the converters to work properly. Other wise they will carbon up. If you unhook your battery before you take it in they will know. It shows that the stored codes were cleared because the battery was disconnected. Most shops around here will not even inspect a vehicle that has recently had the codes cleared. It could take up to a week or 2 to normalize depending on how much the vehicle is used and how many heat cycles. Some vehicles will normalize after only a couple thermostat heat cycles and some take much longer. You can use a scan tool to tell you when it's ready but do not use it to clear any of the stored codes if you need SMOG inspection. Once the entry that shows that the codes was cleared goes away you should be good to go.
-
Blame @Labob that's his map. I'm such an instigator lol.
-
@Labob It's a good map but the sound is ALL fucked up. There are constant ambient sounds that are so loud that you can not hear anything else. Can't hear a grenade land at your feet or even hear the damn thing go off. Ambient sounds work ok in COD5 maps but tend to glitch out on COD4. The 1st version has random spawns. IMO that is unplayable. Especially when people quickly figure out that all you have to do is spawn and back up a couple of feet and camp where you just spawned and spawn kill the shit out of people. That's horrible.
-
Damnit Wiggles you better get yourself better. Don't do that again.
-
See? See? Bitched at if we DO switch maps and bitched at if we DO NOT switch maps. Darn idiots don't know what they want.
-
!FU @Crusher Happy belated Birthday
-
!FU @Bas Happy Birthday.
-
I'm to cheap to spend the $10
-
@Angelz likes being abused
-
My speeds are usually a bit higher. Last time I checked it was between 350/15 350/18. Might have something to do with the large amount of ice hanging on the lines around here. @Sikon Your upload speed ouch! Are you using WiFi? Decent download speeds and lower than average upload speed usually indicates some sort of jitter or packet loss. Could be someone using your WiFi? Had that happen a while ago. I looked in my router for connected devices and seen that 1 of my neighbors had his TV connected to my WiFi. That's what I get for using the default login and password lol. I changed the password and deleted the bastards TV from the connected devices. Problem solved.
-
Android? @UNPROFOR ? It works ok on IOS as far as I can tell.
-
That's either implants or Injections. Definitely not natural. Fucking nasty if you ask me.
-
I normally never get to be first.... HAPPY BIRTHDAY BUDMAN!!!!
J3st3r replied to hxtr's topic in General Discussion
Happy Birthday Buttman! -
I'm guessing you never flew a helicopter or a Jet in Battlefield 1942 Desert Combat or BF2 before. lol The Tootpick sized cord on the Razor mice do not hold up. The only Razer mouse that I've owned that held up longer than 2-3 years was the Boomslang ball mouse. The company was sold to a company out of Singapore shortly after the Boomslang 2500 came out. I've had 1 Diamondback which lasted just over 2 years, 2 Deathadders because they sent me a 2nd one when I RMAed the 1 after it died in less than 2 weeks (They actually sent me a letter with it and an apology stating that a few with defective switches slipped through there QA department so they gave me 2 brand new Deathadder mice) (I gave 1 to my brother and his went kaput in about 8 months and mine lasted for just over 1 year) and a Lachesis that the cord failed on after 8 months so I took a hammer to it because the Limp dick of a cord that they put on them shorted out and burnt out the USB ports on the Very Expensive DFI LanParty motherboard that I had. Overpriced Cheaply built Chinese Junk with a cool illuminated green logo lol They do have a very good Lazer in them and the Razer Synapse software is much much better than Logitechs (LGS) Logitech Gaming Software. The Logitech MX 518 gaming mouse was the best all around mouse that you could get that would hold up to pretty much any abuse. The G500 which is what I'm using is a tad bit better because of it's Awesome Lazer. It will literally track perfectly on Any surface. It tracks just as good on thick Carpet as it does on a $40 Razer Destructor 2 Pro gaming hard mouse mat. You can lift the mouse up about 1/2 of an inch off the mouse pad and it still tracks perfectly. That's how I can do the Jump and Flic around corners so fast on COD4. Anyone that did any sort of Pro gaming in the past should know about the Flic.
- 27 replies
-
It didn't fall apart? I bought 1 for my Dad to use when he plays his POGO games and his literally fell apart.
- 27 replies
-
Still using my Locitech G500 but my next mouse will be the 502 Hero Pro 16k dps wired mouse unless they release something better. https://www.amazon.com/Logitech-G502-Performance-Gaming-Mouse/dp/B07GBZ4Q68/ref=sr_1_7?keywords=Logitech+gaming+mouse&qid=1547993590&s=Electronics&sr=1-7 Razor mice are SHIT! It's a miracle If you are able to get more than 2-3 years out of 1 before the cord goes bad and the feet fall off. I used to use nothing but Razor stuff and I can't tell you how many I've had to sent in that were still under Warranty when they broke. If you get a Razor mouse or Keyboard please make sure that you get the extended Warranty. I have the expensive $49 Wallmart BlackWeb "gaming mouse" and it's the biggest POS I've ever used. After "breaking it in" buying a couple thousand crafting materials in my MMO game the damn thing started to double click and now the damn buttons feel mushy. No more clicky clicky. I bet my 8 year old Logitech G500 5.7k dpi lazer mouse has atleast 10 Million clicks on it and it works perfect. Still 100% original even the teflon feet. The G500 came out in 2009 and I got mine on sale for $38 + shipping.
- 27 replies
-
Ya it's just a stock photo. Read the listing. They sell ALOT of memory and they have really good feedback.
-
I'm Going to grab these for $22.95 shipped. 4x 2gb 5300 667mhz https://www.ebay.com/itm/8GB-DDR2-PC-5300-MEMORY-RAM-DELL-DIMENSION-E310-PRECISION-WORKSTATION-T3400-380/223276085966?hash=item33fc4ab2ce:g:JMUAAOSw7OdcC--b:sc:USPSFirstClass!15554!US!-1:rk:44:pf:0 Seller Guarantees they will work in a dell dimension e310 which is an old Prescott compatible P4 LGA775 machine. Should work in my XPS without any problems. I did put a my old 160gig Intel 320 series Sata 2 SSD in it when I upgraded the SSD in my main computer. And it has a WD Black 640gb storage drive in it for all of my midget porn.
-
I might try a 4x 2gb kit of 5300. I did some reading and it Seems like certain memory controllers do not like to run 1.8v DDR2 800 in all 4 slots. I had similar problems with the old VIA chipset boards back in the day. They would run DDR 400 in 2 slots but would only run up to DDR 266 or 333 speeds with all 4 slots populated.
-
That's part of the problem that I have with my 2007 Dell XPS 420 which uses DDR2. It says it supports up to 8gb in 2gb max per module and I have a 4x2gb kit but atleast 1 stick is bad. I currently have 4x 1gb sticks of DDR2 800 in it. I have a couple of games on it but I mostly use it for KODI. With a couple dozen plugins it can easily use 4gb+ of memory. Wish it was a DDR3 board. Then I could whack in 2x 4gb sticks or 2x 8gb sticks and be done with it. I hate to part with the damn thing. It cost over $1800 when it was bought new "On Sale" by my aunt. List price was $2479. BTW that's almost 2x what I have in my current PC lol This was a Really FAST, fully loaded computer back in the day. It was almost as fast as the $7000 Alienware Area-51 7500.
-
Wonder if something like that would work in my old dell XPS 420? It had a core 2 duo and I upgraded it to a Core 2 Quad Q6600. It does have the Intel X38 Express chipset but Being a Dell it's very limited to what CPU and memory will actually work in it.
-
social media enough said. The WORLD would be a MUCH MUCH better place without that bullshit. How many Deaths world wide are contributed to social media daily? I bet it's in the hundreds. Seriously it's become damn near as bad as the Aids epidemic of the 90s. People think that they can say Anything about Anyone without consequences???????? Are we raising a bunch of fucking STUPID motherfuckers or something that they think this is OK? Most if not all School shootings were caused by social media. I can see where this is going. WW3 will start by some asshole that said something about another asshole on social media.