KaptCrunch Posted November 16, 2021 Member ID: 389 Group: *** Clan Members Followers: 45 Topic Count: 295 Topics Per Day: 0.06 Content Count: 4466 Content Per Day: 0.84 Reputation: 3627 Achievement Points: 36490 Solved Content: 0 Days Won: 39 Joined: 09/14/09 Status: Offline Last Seen: 25 minutes ago Birthday: 01/01/1970 Device: Windows Share Posted November 16, 2021 (edited) after a few years the fluid evapourates out of loop and no cooling working cut the inlet tube to pump and add a rez to loop and place rez at top of loop to burp loop with that set up of self burping if not want to cut tube have rad higher than cpu and rad with hose closest to CPU (bottom so air will be at top of rad away from tubes) this way no bubbles circulate and not starve pump but over time when fluid level drops in rad will loose cooling power when fluid is low need to top up again or buy another unit if handy remove tube and fill with distilled water Edited November 16, 2021 by KaptCrunch larrymc and MtDeW 2 Link to comment Share on other sites More sharing options... Awards
MtDeW Posted November 16, 2021 Member ID: 49 Group: ** Registered Users Followers: 6 Topic Count: 113 Topics Per Day: 0.02 Content Count: 835 Content Per Day: 0.16 Reputation: 992 Achievement Points: 11411 Solved Content: 0 Days Won: 7 Joined: 09/01/09 Status: Offline Last Seen: Yesterday at 03:32 AM Birthday: 02/09/1966 Device: Windows Share Posted November 16, 2021 intel fan boys watch this! larrymc 1 Link to comment Share on other sites More sharing options...
lTplkey336 Posted November 16, 2021 Member ID: 27768 Group: *** Clan Members Followers: 10 Topic Count: 4 Topics Per Day: 0.00 Content Count: 938 Content Per Day: 0.52 Reputation: 1137 Achievement Points: 7764 Solved Content: 0 Days Won: 1 Joined: 05/18/19 Status: Offline Last Seen: 2 hours ago Device: Windows Share Posted November 16, 2021 Should of had a radiator cap on top of radiator to check level. Just make sure your pc is off and radiator is cool so you dont burn yourself . LOL larrymc 1 Link to comment Share on other sites More sharing options... Awards
KaptCrunch Posted November 16, 2021 Member ID: 389 Group: *** Clan Members Followers: 45 Topic Count: 295 Topics Per Day: 0.06 Content Count: 4466 Content Per Day: 0.84 Reputation: 3627 Achievement Points: 36490 Solved Content: 0 Days Won: 39 Joined: 09/14/09 Status: Offline Last Seen: 25 minutes ago Birthday: 01/01/1970 Device: Windows Author Share Posted November 16, 2021 8 hours ago, lTplkey336 said: Should of had a radiator cap on top of radiator to check level. Just make sure your pc is off and radiator is cool so you dont burn yourself . LOL need a fill port Key. shame AIO not supply one larrymc 1 Link to comment Share on other sites More sharing options... Awards
Slackernet Posted November 17, 2021 Member ID: 23498 Group: ++ Minecraft Admin Followers: 12 Topic Count: 106 Topics Per Day: 0.03 Content Count: 700 Content Per Day: 0.23 Reputation: 229 Achievement Points: 5750 Solved Content: 0 Days Won: 1 Joined: 11/12/15 Status: Offline Last Seen: 4 hours ago Device: Linux Share Posted November 17, 2021 be quiet brand cooler has an inline pump and a refill port https://www.newegg.com/be-quiet-liquid-cooling-system/p/2YM-0069-00004?Description=water cooling&cm_re=water_cooling-_-9SIA68VBZU7750-_-Product&quicklink=true larrymc 1 Link to comment Share on other sites More sharing options... Awards
X-RayXI Posted November 17, 2021 Member ID: 133 Group: ++++ Senior Admin Followers: 77 Topic Count: 602 Topics Per Day: 0.11 Content Count: 6888 Content Per Day: 1.29 Reputation: 1371 Achievement Points: 44109 Solved Content: 0 Days Won: 3 Joined: 09/02/09 Status: Offline Last Seen: 3 hours ago Birthday: 12/12/1971 Device: Windows Share Posted November 17, 2021 17 hours ago, KaptCrunch said: after a few years the fluid evapourates out of loop and no cooling working cut the inlet tube to pump and add a rez to loop and place rez at top of loop to burp loop with that set up of self burping if not want to cut tube have rad higher than cpu and rad with hose closest to CPU (bottom so air will be at top of rad away from tubes) this way no bubbles circulate and not starve pump but over time when fluid level drops in rad will loose cooling power when fluid is low need to top up again or buy another unit if handy remove tube and fill with distilled water The picture there of the radiator, that is what Gamers Nexus was showing an at least 6 mouths ago. With those AIO's, a lot lot have these problems or people finding out so much later, the placement is wrong. The manuals are for sure not mentioning anything. Some years ago, I spoke with Corsair about a model that even cools the VRMs and the Mosfets, to have a fan on top and blowing around the housing of those pumps. Here we go, some brands are waking up and lots more testing are done and designs. I love people like Steve from Gamers Nexus, Hardware Unboxed, foolish Jay2cents, we need them. I wish I could, but yeah. It is plain stupid, that "you" or I, have to dig into video's what is right and wrong to do. Or if something breaks, that can be solved by just a few cents. I am so happy with the Right to Repair going, even catching up in the EU. Lesser waste and the limit should be, dead=dead. Link to comment Share on other sites More sharing options... Awards
KaptCrunch Posted November 17, 2021 Member ID: 389 Group: *** Clan Members Followers: 45 Topic Count: 295 Topics Per Day: 0.06 Content Count: 4466 Content Per Day: 0.84 Reputation: 3627 Achievement Points: 36490 Solved Content: 0 Days Won: 39 Joined: 09/14/09 Status: Offline Last Seen: 25 minutes ago Birthday: 01/01/1970 Device: Windows Author Share Posted November 17, 2021 X-ray where you think they get thier idea's from ? I've been the pioneer of water cooling PC's. be it air (heat pipes) and BillyA so called guru of water coolong was plagiarizing me and the major water cooling companys taking my idea to market for not water mark my work credits: heat pipes, AIO, the wave fins, peltier, fin & plate, phase change magnetic pump, fittings, so when i caught on what they were doing i fixed them with false info on a pump rez set-up . note stay away acrylic material for when heat cycles it will crack rads i gave the underdog info to build a rad that will outperforming leading crown same with CPU water, block kicking swiss cheeze to the curb larrymc 1 Link to comment Share on other sites More sharing options... Awards
KaptCrunch Posted November 18, 2021 Member ID: 389 Group: *** Clan Members Followers: 45 Topic Count: 295 Topics Per Day: 0.06 Content Count: 4466 Content Per Day: 0.84 Reputation: 3627 Achievement Points: 36490 Solved Content: 0 Days Won: 39 Joined: 09/14/09 Status: Offline Last Seen: 25 minutes ago Birthday: 01/01/1970 Device: Windows Author Share Posted November 18, 2021 Xray repeat biz, reason for BS installation guide Link to comment Share on other sites More sharing options... Awards
X-RayXI Posted November 18, 2021 Member ID: 133 Group: ++++ Senior Admin Followers: 77 Topic Count: 602 Topics Per Day: 0.11 Content Count: 6888 Content Per Day: 1.29 Reputation: 1371 Achievement Points: 44109 Solved Content: 0 Days Won: 3 Joined: 09/02/09 Status: Offline Last Seen: 3 hours ago Birthday: 12/12/1971 Device: Windows Share Posted November 18, 2021 55 minutes ago, KaptCrunch said: Xray repeat biz, reason for BS installation guide Yo, why don't you just email me. I know the DM's are there, but that way, way quicker. Or just wait I was just tweeting to Hardware Unboxed and he replied, that was cool. That video of Linus, is so funny. Also that I remember that one. Link to comment Share on other sites More sharing options... Awards
X-RayXI Posted November 18, 2021 Member ID: 133 Group: ++++ Senior Admin Followers: 77 Topic Count: 602 Topics Per Day: 0.11 Content Count: 6888 Content Per Day: 1.29 Reputation: 1371 Achievement Points: 44109 Solved Content: 0 Days Won: 3 Joined: 09/02/09 Status: Offline Last Seen: 3 hours ago Birthday: 12/12/1971 Device: Windows Share Posted November 18, 2021 https://twitter.com/HardwareUnboxed/status/1461141961994297354 Link to comment Share on other sites More sharing options... Awards
KaptCrunch Posted November 18, 2021 Member ID: 389 Group: *** Clan Members Followers: 45 Topic Count: 295 Topics Per Day: 0.06 Content Count: 4466 Content Per Day: 0.84 Reputation: 3627 Achievement Points: 36490 Solved Content: 0 Days Won: 39 Joined: 09/14/09 Status: Offline Last Seen: 25 minutes ago Birthday: 01/01/1970 Device: Windows Author Share Posted November 18, 2021 On 11/17/2021 at 12:07 AM, X-RayXI said: The picture there of the radiator, that is what Gamers Nexus was showing an at least 6 mouths ago. With those AIO's, a lot lot have these problems or people finding out so much later, the placement is wrong. The manuals are for sure not mentioning anything. yes it is where you think they got the content from i gave a cookie to steve Link to comment Share on other sites More sharing options... Awards
Recommended Posts