L!ckALotAPus Posted January 5, 2017 Member ID: 21216 Group: **- Inactive Registered Users Followers: 20 Topic Count: 33 Topics Per Day: 0.01 Content Count: 1695 Content Per Day: 0.43 Reputation: 1732 Achievement Points: 15803 Solved Content: 0 Days Won: 0 Joined: 07/15/14 Status: Offline Last Seen: January 8, 2020 Birthday: 02/09/1966 Posted January 5, 2017 Ah now we're getting there, remember what I said earlier about Ram, firstly find out the make and spec of the mremory hopefully its all the same then :- 1/. Get your motherboard manual and find out if it accepts that memory spec i.e. size,speed and frequency 2/. There will be a bit in the manual that tells you what is accepted in each memory slot, make sure you know the slot numbers from the diagram 3/. It will tell you what the settings should be in the bios, hopefully auto is selected. 4/. It may be that your previous memory was configured dual channel and these sticks won't work dual channel, especially for two pairs Now this is a fairly complicated subject and some level of expertise is needed but not beyond anyone who treads carefully, for now only use two MATCHING sticks of memory in the slots recommended in the manual, come back after you've done this, take two sticks out. Memory gives numerous random problems and others will nod their heads when I say this, it is possible that two motherboards the same one will accept, one will reject I've had it happen a couple of times. 4 x DIMM, Max. 32GB, DDR3 2133(O.C.)/1866*/1600/1333/1066 MHz ECC, Non-ECC, Un-buffered Memory Dual Channel Memory Architecture ** Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists). * Due to OS limitation, when installing total memory of 4GB capacity or more, Windows® 32-bit operation system may only recognize less than 3GB. Install a 64-bit Windows® OS when you want to install 4GB or more memory on the motherboard. * Due to CPU spec., AMD 100 series CPUs support up to DDR3 1066MHz. With ASUS design, this motherboard can support up to DDR3 1333MHz. LightHammer02 1
TheHammer Posted January 5, 2017 Member ID: 4101 Group: *** Clan Members Followers: 23 Topic Count: 55 Topics Per Day: 0.01 Content Count: 1131 Content Per Day: 0.25 Reputation: 807 Achievement Points: 8839 Solved Content: 0 Days Won: 0 Joined: 12/05/12 Status: Offline Last Seen: 7 hours ago Birthday: 07/08/1962 Device: Windows Posted January 5, 2017 I like pancakes Awards
KicknDatAzz Posted January 5, 2017 Member ID: 833 Group: *** Clan Members Followers: 41 Topic Count: 49 Topics Per Day: 0.01 Content Count: 769 Content Per Day: 0.14 Reputation: 598 Achievement Points: 5724 Solved Content: 0 Days Won: 0 Joined: 12/04/09 Status: Offline Last Seen: May 1 Device: Windows Posted January 5, 2017 If the ram turns out to not be the issue.... If you are having the issue and your son isnt playing the same games, its not the internet connection. You need to check your ethernet port on your PC if you are wired. If you are playing on wireless, well thats likely the issue. You also may want to check out the vid card. If you have a spare ethernet card i would install it and try playing from that connection, same goes for the vid card if you have a working spare. Awards
LightHammer02 Posted January 5, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 5, 2017 If the ram turns out to not be the issue.... If you are having the issue and your son isnt playing the same games, its not the internet connection. You need to check your ethernet port on your PC if you are wired. If you are playing on wireless, well thats likely the issue. You also may want to check out the vid card. If you have a spare ethernet card i would install it and try playing from that connection, same goes for the vid card if you have a working spare. I don't have any spares of anything... I'll look at the ram this afternoon and see what the specs on it are. Can't remember...
LightHammer02 Posted January 5, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 5, 2017 After sitting down this morning and talking with my son while he's home for a snow day... it's most definitely our Internet! He had never told me before that he has the same issues as me!! So.. time to call my ISP and get this shit figured out ASAP!!! Sent from my SM-G930V using Tapatalk
RobMc Posted January 5, 2017 Member ID: 25355 Group: ** Registered Users Followers: 31 Topic Count: 272 Topics Per Day: 0.09 Content Count: 5824 Content Per Day: 1.90 Reputation: 9236 Achievement Points: 63677 Solved Content: 0 Days Won: 141 Joined: 12/14/16 Status: Offline Last Seen: April 14 Birthday: 01/05/1954 Device: Windows Posted January 5, 2017 Ah how little we talk to our children nowadays, glad its solved, remember my very first words try the internet first, software second and hardware last, remember that my friend, Happy New Year from the UK. LightHammer02 1
LightHammer02 Posted January 5, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 5, 2017 Ah how little we talk to our children nowadays, glad its solved, remember my very first words try the internet first, software second and hardware last, remember that my friend, Happy New Year from the UK. I talk with him every day, he just never mentioned to me about having these issues... I asked him all the time "How's the game running?" and he tells me they are working fine... so it was news to me
LightHammer02 Posted January 14, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 14, 2017 UPDATE Pretty sure it's my RAM.... I was playing an offline game... pretty graphically intense... and about 20 minutes in... chopping started!! DAMNIT!!!! I don't have ANY money to friggin buy any new RAM!!! FML!!!!
Sammy Posted January 14, 2017 Member ID: 3036 Group: ***- Inactive Clan Members Followers: 32 Topic Count: 219 Topics Per Day: 0.04 Content Count: 9419 Content Per Day: 1.92 Reputation: 7515 Achievement Points: 62539 Solved Content: 0 Days Won: 21 Joined: 11/29/11 Status: Offline Last Seen: March 17 Birthday: 04/26/2008 Device: Windows Posted January 14, 2017 Video card overheating? Was probably mentioned earlier but check the intakes and outtakes. If you want, might also open it up (assuming no warranty) and check to see if the heatsink has a carpet of dust on it. Just be careful to do it someplace where you wont lose screws. LightHammer02 1 Awards
LightHammer02 Posted January 14, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 14, 2017 Video card overheating? Was probably mentioned earlier but check the intakes and outtakes. If you want, might also open it up (assuming no warranty) and check to see if the heatsink has a carpet of dust on it. Just be careful to do it someplace where you wont lose screws. No overheating... I run MSI Afterburner and turn the fan speed up to 100% and I run cool. Processor is liquid cooled, so no overheating there. I blow the dust out of my computer every other week to keep it clean... So no dust in the machine at all. The RAM was recently changed to some used RAM... so I have a feeling that it's the culprit... I just got 2 new jobs (THANK GOD!!) But it will be a LONG while before I can afford RAM... I'm so far behind on my bills, it will take me close to a year to get caught back up
LightHammer02 Posted January 15, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 15, 2017 Yeah... I'm fucking done until I can figure it out... no matter what I play, it fucking lags out!!! Beyond pissed off right now!!! :rant: :rant: :rant: :rant: :rant: :rant: :rant: :rant: :rant: :rant: :rant: :rant:
LightHammer02 Posted January 15, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 15, 2017 Opened up my case.... looked up the specs on my MoBo... it reads "up tp 32gb DDR3 1800 Mhz Memory" The RAM I have is Patriot DDR3 1600Mhz Memory... 2 pairs of 4gb sticks, not the exact same type though... I'm techtarded when it comes to RAM... is THIS is what's causing my issues?!?!?!?!?!
RobMc Posted January 15, 2017 Member ID: 25355 Group: ** Registered Users Followers: 31 Topic Count: 272 Topics Per Day: 0.09 Content Count: 5824 Content Per Day: 1.90 Reputation: 9236 Achievement Points: 63677 Solved Content: 0 Days Won: 141 Joined: 12/14/16 Status: Offline Last Seen: April 14 Birthday: 01/05/1954 Device: Windows Posted January 15, 2017 (edited) HI LH, Thought we had this sorted but looks like we didn't, Ram is a highly likely source of the problem as I mentioned in earlier posts, so heres what to do initially before we look at anything in the bios :- First look at your motherboard manual and find out what and how much each slot takes, it is highly likely initially that the board was set up as dual channel in two slots and now you ain't running it Second presuming each slot takes up to 4gb (which is likely) find out which are the 2 main slots (i.e. if you only had two sticks - manual should state this ) and pull the memory from the others, if the problem is because of running 4 slots then it should run ok, if still choppy swap out memory sticks one by one to see if you have a bad one. Let me know as after this it gets a little trickier IF YOU DO NOT HAVE AN EARTHING STRAP ALWAYS EARTH YOURSELF BEFORE TOUCHING RAM, i.e. a house radiator or metal pipe to ground Edited January 15, 2017 by RobMc LightHammer02 1
LightHammer02 Posted January 15, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 15, 2017 HI LH, Thought we had this sorted but looks like we didn't, Ram is a highly likely source of the problem as I mentioned in earlier posts, so heres what to do initially before we look at anything in the bios :- First look at your motherboard manual and find out what and how much each slot takes, it is highly likely initially that the board was set up as dual channel in two slots and now you ain't running it Second presuming each slot takes up to 4gb (which is likely) find out which are the 2 main slots (i.e. if you only had two sticks - manual should state this ) and pull the memory from the others, if the problem is because of running 4 slots then it should run ok, if still choppy swap out memory sticks one by one to see if you have a bad one. Let me know as after this it gets a little trickier IF YOU DO NOT HAVE AN EARTHING STRAP ALWAYS EARTH YOURSELF BEFORE TOUCHING RAM, i.e. a house radiator or metal pipe to ground Thanks for all the help Rob! Here's what my manual states: "4 x DIMMs, Max. 32GB, DDR3 2133 (O.C.)/1866/1600/1333/1066 MHz, ECC, Non-ECC, unbuffered memory" "The maximum 32GB memory capacity can be supported with 8GN or above DIMMs, ASUS will update the memory QVL once the DIMMs are available on the market" "Due to CPU space, AMD 100 Series CPUs support up to DDR3 1066MHz. With ASUS design, this motherboard can support up to DDR3 1333MHz" There is some more about visiting ASUS website and such and something about Windows 32 bit, but I'm running a 64 bit version...
RobMc Posted January 15, 2017 Member ID: 25355 Group: ** Registered Users Followers: 31 Topic Count: 272 Topics Per Day: 0.09 Content Count: 5824 Content Per Day: 1.90 Reputation: 9236 Achievement Points: 63677 Solved Content: 0 Days Won: 141 Joined: 12/14/16 Status: Offline Last Seen: April 14 Birthday: 01/05/1954 Device: Windows Posted January 15, 2017 OK it must be listed somewhere which slots you use with only two sticks, it would probably be easier for you to tell me the exact motherboard and version then I'll look it up, should have thought of that, tell me what your video card is too
LightHammer02 Posted January 15, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 15, 2017 OK it must be listed somewhere which slots you use with only two sticks, it would probably be easier for you to tell me the exact motherboard and version then I'll look it up, should have thought of that, tell me what your video card is tooMoBo is an ASUS M5A97 R2.0GPU is a GTX 970 Sent from my SM-G930V using Tapatalk
RobMc Posted January 15, 2017 Member ID: 25355 Group: ** Registered Users Followers: 31 Topic Count: 272 Topics Per Day: 0.09 Content Count: 5824 Content Per Day: 1.90 Reputation: 9236 Achievement Points: 63677 Solved Content: 0 Days Won: 141 Joined: 12/14/16 Status: Offline Last Seen: April 14 Birthday: 01/05/1954 Device: Windows Posted January 15, 2017 (edited) OK, now place/view your motherboard so the memory slots are in the upper right hand corner, left to right the slots are labelled A!, A2, B1 & B2 It will only work in the following configuration :- 1 memory module - must be in A2 ONLY 2 modules - one in A2 and one in B2 ONLY 4 modules in all four Your modules may not be made up in 500mb blocks, i.e. for 4gb you should not have 8 squares Now what I want you to do is ONLY LEAVE the modules in A2 & B2, i.e. take A1 & B1 out and see how it runs You said some of them were different, use two the same Edited January 15, 2017 by RobMc LightHammer02 1
LightHammer02 Posted January 15, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 15, 2017 OK, now place/view your motherboard so the memory slots are in the upper right hand corner, left to right the slots are labelled A!, A2, B1 & B2 It will only work in the following configuration :- 1 memory module - must be in A2 ONLY 2 modules - one in A2 and one in B2 ONLY 4 modules in all four Your modules may not be made up in 500mb blocks, i.e. for 4gb you should not have 8 squares Now what I want you to do is ONLY LEAVE the modules in A2 & B2, i.e. take A1 & B1 out and see how it runs That's the way I have it set up... I will take some of it out (which will drop me to 8Gb) and swap back and forth... the MoBo is only 2.5 years old... so shouldb't be giving me issues
LightHammer02 Posted January 15, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 15, 2017 (edited) OK, now place/view your motherboard so the memory slots are in the upper right hand corner, left to right the slots are labelled A!, A2, B1 & B2 It will only work in the following configuration :- 1 memory module - must be in A2 ONLY 2 modules - one in A2 and one in B2 ONLY 4 modules in all four Your modules may not be made up in 500mb blocks, i.e. for 4gb you should not have 8 squares Now what I want you to do is ONLY LEAVE the modules in A2 & B2, i.e. take A1 & B1 out and see how it runs You said some of them were different, use two the same They are all four Patriot RAM... 2 sticks are the same, the other 2 sticks are them same... but not all 4 are the same, if that makes sense... I'll take a pic and post it here in a few minutes Edited January 15, 2017 by LightHammer02
LightHammer02 Posted January 15, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 15, 2017 Okay, here are pics of the RAM, the stickers on them, how I had them to start and how it is now... Sent from my SM-G930V using Tapatalk
RobMc Posted January 15, 2017 Member ID: 25355 Group: ** Registered Users Followers: 31 Topic Count: 272 Topics Per Day: 0.09 Content Count: 5824 Content Per Day: 1.90 Reputation: 9236 Achievement Points: 63677 Solved Content: 0 Days Won: 141 Joined: 12/14/16 Status: Offline Last Seen: April 14 Birthday: 01/05/1954 Device: Windows Posted January 15, 2017 Ah I think I spot the problem, both run at different voltages, let me check your manual again, I'll do it in the morning as bedtime here in UK, you have them in correct slots but the voltages may be set wrong in the bios unless your board autodetects, I thought you said there were 4 sticks?? ' you're getting mixed up with the 4gb you have 2 sticks of 8gb not 4 sticks of 4gb as earlier posts, Take the right hand stick out and try with just the left hand, if still choppy swap modules in left hand
LightHammer02 Posted January 15, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 15, 2017 Ah I think I spot the problem, both run at different voltages, let me check your manual again, I'll do it in the morning as bedtime here in UK, you have them in correct slots but the voltages may be set wrong in the bios unless your board autodetects, I thought you said there were 4 sticks?? ' you're getting mixed up with the 4gb you have 2 sticks of 8gb not 4 sticks of 4gb as earlier posts, Take the right hand stick out and try with just the left hand, if still choppy swap modules in left handThere are haha I only pulled one of each out, sorry lol Sent from my SM-G930V using Tapatalk
LightHammer02 Posted January 16, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 16, 2017 Don't know if it's the RAM... I tried my kid's brand new 16GB of (2 x 8GB) and it still happened.... so I have a feeling it's an issue with the MoBo
LightHammer02 Posted January 16, 2017 Member ID: 22608 Group: **- Inactive Registered Users Followers: 1 Topic Count: 39 Topics Per Day: 0.01 Content Count: 410 Content Per Day: 0.11 Reputation: 263 Achievement Points: 6027 Solved Content: 0 Days Won: 0 Joined: 06/01/15 Status: Offline Last Seen: July 16, 2018 Birthday: 10/23/1983 Author Posted January 16, 2017 Probably just take a break from gaming... can't afford shit right now. Can't even afford my bills which are piling up, so computer parts are WAY on the back burner... Thanks for the help everyone Sent from my SM-G930V using Tapatalk
hxtr Posted January 16, 2017 Member ID: 220 Group: **- Inactive Registered Users Followers: 147 Topic Count: 595 Topics Per Day: 0.10 Content Count: 16950 Content Per Day: 2.96 Reputation: 13538 Achievement Points: 129714 Solved Content: 0 Days Won: 120 Joined: 09/04/09 Status: Offline Last Seen: October 26, 2023 Birthday: 04/05/1970 Posted January 16, 2017 Turn off your auto-porn downloads, bud. Lol, just sayin'. Ayaq You guys crack me up. lol LightHammer02 and Damage_inc- 2
Recommended Posts