KaptCrunch Posted February 6, 2017 Member ID: 389 Group: *** Clan Members Followers: 45 Topic Count: 295 Topics Per Day: 0.06 Content Count: 4461 Content Per Day: 0.84 Reputation: 3625 Achievement Points: 36461 Solved Content: 0 Days Won: 39 Joined: 09/14/09 Status: Offline Last Seen: 17 hours ago Birthday: 01/01/1970 Device: Windows Share Posted February 6, 2017 Just wanted to say there is samsung MAGICIAN software update and firmware seems smoothed out some the jerkiness under win10 Link to comment Share on other sites More sharing options... Awards
hxtr Posted February 6, 2017 Member ID: 220 Group: **- Inactive Registered Users Followers: 147 Topic Count: 595 Topics Per Day: 0.11 Content Count: 16950 Content Per Day: 3.17 Reputation: 13538 Achievement Points: 129713 Solved Content: 0 Days Won: 120 Joined: 09/04/09 Status: Offline Last Seen: October 26, 2023 Birthday: 04/05/1970 Device: Windows Share Posted February 6, 2017 I have some 850's Pro's and some 850 EVO's. Great drives... super fast. Link to comment Share on other sites More sharing options...
ChknFngr Posted March 4, 2017 Member ID: 922 Group: ***- Inactive Clan Members Followers: 72 Topic Count: 149 Topics Per Day: 0.03 Content Count: 3472 Content Per Day: 0.66 Reputation: 1286 Achievement Points: 23224 Solved Content: 0 Days Won: 1 Joined: 12/23/09 Status: Offline Last Seen: November 16, 2021 Birthday: 10/01/1975 Share Posted March 4, 2017 yea something weird everytime i turn the pc on now i got a message from magician about WMI not activated. i should investigate a bit with bios settings coz this ssd replace an old nwme ssd card and i had to do some changes in the bios back in the days, so maybe i should change something to get better results, but for now my 850 pro is running a bit too slow hxtr 1 Link to comment Share on other sites More sharing options... Awards
Tw33tle_Dee Posted March 4, 2017 Member ID: 23628 Group: ** Registered Users Followers: 1 Topic Count: 33 Topics Per Day: 0.01 Content Count: 337 Content Per Day: 0.11 Reputation: 218 Achievement Points: 2278 Solved Content: 0 Days Won: 0 Joined: 11/26/15 Status: Offline Last Seen: 5 hours ago Device: Windows Share Posted March 4, 2017 My 950 pro was running slow also. Looked in device manager and for my AHCI driver the standard Microsoft driver was listed,( my ssd was listed as a removable device in "safely remove hardware"). I found an Intel driver that was modded for W10 and also digitally signed. Upon installation ssd was removed from "safely remove hardware" and my read write scores increased greatly. Modded Intel Drivers; http://www.win-raid.com/t11f23-Modded-Intel-AHCI-and-RAID-Drivers-digitally-signed.html Slackernet 1 Link to comment Share on other sites More sharing options...
6FtUnder Posted March 5, 2017 Member ID: 830 Group: ***- Inactive Clan Members Followers: 3 Topic Count: 27 Topics Per Day: 0.01 Content Count: 96 Content Per Day: 0.02 Reputation: 31 Achievement Points: 792 Solved Content: 0 Days Won: 0 Joined: 12/04/09 Status: Offline Last Seen: December 23, 2021 Birthday: 01/07/1969 Share Posted March 5, 2017 Yes and I hate how Microsoft tries to force people to use their generic drivers. Most people don't know the difference Link to comment Share on other sites More sharing options...
ChknFngr Posted March 5, 2017 Member ID: 922 Group: ***- Inactive Clan Members Followers: 72 Topic Count: 149 Topics Per Day: 0.03 Content Count: 3472 Content Per Day: 0.66 Reputation: 1286 Achievement Points: 23224 Solved Content: 0 Days Won: 1 Joined: 12/23/09 Status: Offline Last Seen: November 16, 2021 Birthday: 10/01/1975 Share Posted March 5, 2017 (edited) yea, actually my ssd was not on ahci mode, so i changed that and put it on the marvel sata 6. (the intel drivers are not working for these ports) But was even slower lol guess i will switch it back to a sata 2 (but with intel drivers) and see if it makes a difference. problem is that this system is getting old (1156 slot) and that fkn marvel port is shit. in other words im stuck with sata 2 speed anyway. gona build a new system soon, but i wanna keep this one as clean and fast as possible Edited March 5, 2017 by ChknFngr Link to comment Share on other sites More sharing options... Awards
Magnus_1 Posted March 5, 2017 Member ID: 1410 Group: *** Clan Members Followers: 38 Topic Count: 24 Topics Per Day: 0.00 Content Count: 522 Content Per Day: 0.10 Reputation: 451 Achievement Points: 3583 Solved Content: 0 Days Won: 0 Joined: 05/12/10 Status: Offline Last Seen: March 31 Birthday: 05/08/1953 Device: Windows Share Posted March 5, 2017 yea something weird everytime i turn the pc on now i got a message from magician about WMI not activated. i should investigate a bit with bios settings coz this ssd replace an old nwme ssd card and i had to do some changes in the bios back in the days, so maybe i should change something to get better results, but for now my 850 pro is running a bit too slow WMI is a service on windows. Go to admin tools, open services and look for Windows Management Instrumentation near the bottom and see if it is started. If not, see if its set to automatic or manual. Also, install and run Samsung Rapid app. Link to comment Share on other sites More sharing options... Awards
Sammy Posted March 5, 2017 Member ID: 3036 Group: ***- Inactive Clan Members Followers: 31 Topic Count: 219 Topics Per Day: 0.05 Content Count: 9419 Content Per Day: 2.08 Reputation: 7515 Achievement Points: 62539 Solved Content: 0 Days Won: 21 Joined: 11/29/11 Status: Offline Last Seen: December 30, 2023 Birthday: 04/26/2008 Device: Windows Share Posted March 5, 2017 Win 7 WMI is set to manual on mine and current off. No messages. However according to the info panel I dont have the intel driver and its recommended I get it. Link to comment Share on other sites More sharing options... Awards
Tw33tle_Dee Posted March 5, 2017 Member ID: 23628 Group: ** Registered Users Followers: 1 Topic Count: 33 Topics Per Day: 0.01 Content Count: 337 Content Per Day: 0.11 Reputation: 218 Achievement Points: 2278 Solved Content: 0 Days Won: 0 Joined: 11/26/15 Status: Offline Last Seen: 5 hours ago Device: Windows Share Posted March 5, 2017 Keep in mind that most munufacturers ssd's will not update the firmware unless it's in AHCI mode. Link to comment Share on other sites More sharing options...
ChknFngr Posted March 6, 2017 Member ID: 922 Group: ***- Inactive Clan Members Followers: 72 Topic Count: 149 Topics Per Day: 0.03 Content Count: 3472 Content Per Day: 0.66 Reputation: 1286 Achievement Points: 23224 Solved Content: 0 Days Won: 1 Joined: 12/23/09 Status: Offline Last Seen: November 16, 2021 Birthday: 10/01/1975 Share Posted March 6, 2017 (edited) WMI is a service on windows. Go to admin tools, open services and look for Windows Management Instrumentation near the bottom and see if it is started. If not, see if its set to automatic or manual. Also, install and run Samsung Rapid app. checked and it is set on automatic start. i guess if i set it on manual, it wont start unless i start it myself, then something else cause it not to start or maybe it start after magician check if its on ? i dunno anyway, after installing and rebooting about 20 times, magician see my ssd on SATA 6 with AHCI activated and TRIM enabled, so that is a +. but speed is too low still Edited March 6, 2017 by ChknFngr Link to comment Share on other sites More sharing options... Awards
Tw33tle_Dee Posted March 6, 2017 Member ID: 23628 Group: ** Registered Users Followers: 1 Topic Count: 33 Topics Per Day: 0.01 Content Count: 337 Content Per Day: 0.11 Reputation: 218 Achievement Points: 2278 Solved Content: 0 Days Won: 0 Joined: 11/26/15 Status: Offline Last Seen: 5 hours ago Device: Windows Share Posted March 6, 2017 Is this on the stock Windows driver? Link to comment Share on other sites More sharing options...
ChknFngr Posted March 7, 2017 Member ID: 922 Group: ***- Inactive Clan Members Followers: 72 Topic Count: 149 Topics Per Day: 0.03 Content Count: 3472 Content Per Day: 0.66 Reputation: 1286 Achievement Points: 23224 Solved Content: 0 Days Won: 1 Joined: 12/23/09 Status: Offline Last Seen: November 16, 2021 Birthday: 10/01/1975 Share Posted March 7, 2017 no, its on the marvel drivers (the only 6GBs sata slots on my board) i did install the intel drivers for the 3GBs sata slots. actually i had better sequential write speed with the windows drivers but the iops was way slower. i still have to try to plug it in the 3GBs sata and see if it makes a difference. gona try later this evening if i have time Link to comment Share on other sites More sharing options... Awards
J3st3r Posted March 7, 2017 Member ID: 2162 Group: ++ COD4 Admin Followers: 153 Topic Count: 152 Topics Per Day: 0.03 Content Count: 5088 Content Per Day: 1.05 Reputation: 5010 Achievement Points: 44663 Solved Content: 0 Days Won: 22 Joined: 01/25/11 Status: Offline Last Seen: 13 hours ago Birthday: 02/26/1972 Device: Windows Share Posted March 7, 2017 Marvel SUCKS ASS Seriously my old Intel 775 ddr2 mobo had Marvel raid and I tried running 2 240gb Intel 520 series SSDs in raid 0 in a PC but it was slower than FUCK.2x faster on the regular old sata 2.My brother had the same problem on a 1156 i7 board. I had a slight problem on my current PC with SSD write speed being 1/2 the advertised speed.Turned out that after doing alot of research on the subject my partition was misaligned.There is a couple tools out there to realign it but haven't found one for free.I ended up going to piratebay and found a good one.I installed it and ran it and uninstalled it.Tested again and it was good to go. Most SSD manufacturers use ATTO disk management benchmark utility because it doesn't use Compressed data to test with.You get a much more accurate reading with uncompressed data but in the real world everything you use has compressed data.So speeds will definitely be a bit slower than advertised. I can hook you up with ATTO and an alignment tool if you want. Here my Intel 520 240gb.Advertised 520/550 @ up to 8gb length 512k-8mb transfer size.Real world test with ATTO 497/545. They say tests results may vary up to 20% depending on how much crap you have on it. Manufacturers also test with Empty drives. ATTO disk benchmark Here. https://www.techpowerup.com/download/atto-disk-benchmark/ Alignment tool is Paragon Professional Alignment Tool 4.0 PM me if you want it and I'll upload to a file host and send ya the link. Link to comment Share on other sites More sharing options... Awards
ChknFngr Posted March 8, 2017 Member ID: 922 Group: ***- Inactive Clan Members Followers: 72 Topic Count: 149 Topics Per Day: 0.03 Content Count: 3472 Content Per Day: 0.66 Reputation: 1286 Achievement Points: 23224 Solved Content: 0 Days Won: 1 Joined: 12/23/09 Status: Offline Last Seen: November 16, 2021 Birthday: 10/01/1975 Share Posted March 8, 2017 Marvel SUCKS ASS Seriously my old Intel 775 ddr2 mobo had Marvel raid and I tried running 2 240gb Intel 520 series SSDs in raid 0 in a PC but it was slower than FUCK.2x faster on the regular old sata 2.My brother had the same problem on a 1156 i7 board. That's exactly what i have a 1156 board with an old i7 870 i never did change it because it has a firewire and i need this. But anyway did'nt had time to put the disc on the sata 2 yet. i dont wanna risk loosing my files, i'll just try this and if speed doesn't change, fuck it, i'll stay like this. and build a new system with a 7700K or with RYZEN we'll see Link to comment Share on other sites More sharing options... Awards
Tw33tle_Dee Posted March 8, 2017 Member ID: 23628 Group: ** Registered Users Followers: 1 Topic Count: 33 Topics Per Day: 0.01 Content Count: 337 Content Per Day: 0.11 Reputation: 218 Achievement Points: 2278 Solved Content: 0 Days Won: 0 Joined: 11/26/15 Status: Offline Last Seen: 5 hours ago Device: Windows Share Posted March 8, 2017 I use this to align partitions and it's free;. https://www.partitionwizard.com/free-partition-manager.html Link to comment Share on other sites More sharing options...
Recommended Posts