Leaderboard

just download a v1.7 iwmp3.exe file and replace the one you already have in the steamfolder with the one you downloaded it will work. here i will even give you my file of the game.... iw3mp.exe

So apparently this is my 3000'th post at least as @YACCster that is. Thanks for looking at all my fabulous musings. -YACC

tks for the help guys...

To find ????

Happy Birthday to all of you ! I hope you have a great one ! @rexbowan, enjoy it to its fullest !

Happy Birthday everyone. Have a great day.

I bought a 1964 3500w Winco Maxi-Watt with a 7.5hp Wisconsin S7D for $75 last fall. Damn thing runs absolutely Perfect after going through the fuel system and cleaning the gen head up and replacing 1 of the regulator Capacitors. I will change the other one out as well because it's most likely Electrically Leaky after 60+ years. Being on the ground side of the regulator if it does go bad all it will do is cause 10-15v higher voltage. This thing has had very very little use over the last 60 some years. Starts in 1 pull and purrs like a kitten. You can not beat the older stuff for Dependability. I'm a sucker for the small Kohler and Wisconsin engines. They can dead dependable with very little maintenance. That's alot more than I can say about any of this newer shit.

Nice find. I too am addicted to craigs list. Look at it everyday wishing I have gotten stuff but abstain from buying. lol

Rotation #82 23 maps by ShadyBrady put in rotation 07/23/22 by Pengy map mp_bog map mp_atp map mp_osg_standoff map mp_storm_b map mp_dooerte map mp_xi_overgrown map mp_nova_crvenka map mp_fr_mgdx4 map mp_convoy map mp_counter map mp_hangareturn map mp_summit map mp_kufah map mp_seatown map mp_flemishtown map mp_doowntown map mp_bo2_town map mp_townville map mp_tobruk_4 map mp_stream map mp_aosta_valley map mp_mw3_vortex map mp_naout Server restarted @ 12:23 p.m. EDT by Pengy Enjoy!

FullSizeRender.mov FullSizeRender.mov

XtremeIdiots would like to wish all members celebrating their birthday today a happy birthday. bobbarker (57)pancakes (28)rexbowan (71)

Rotation #2 21 maps put in rotation 07/23/22 by Pengy map mp_4hanoi map mp_aquadukt map mp_athena map mp_backlot_snow map mp_redzone map mp_chateau4 map mp_brokenroad map mp_gb_bunker_b1 map mp_cassino map mp_chicago map mp_e_streetstation map mp_arbo_a map mp_fav map mp_funland map mp_goodtimes map mp_hhk_sandman map mp_moh_sfrance_b1 map mp_ncc_1701 map mp_prisonblock map mp_m_town map mp_shipment_island Server restarted @ 10:30 a.m. EDT by Pengy Enjoy!

Just checked the rotations of the past time, only shadybrady's rotations are valid nowadays? All the others are not relevant anymore? Just wondering @WldPenguin

Happy Birthday folks! Great playing with you Sparkshunt.

Happy Birthday folks!

Thanks Athena!

any problems? come see me in ts

you can actually upgrade to cod4x and it will work fine.

The temptation to edit it down to 2999 is strong...

Happy belated Birthday ! I hope you had a great one !

Happy belated Birthday to all of you !

its just a ficticious marcial art style from a movie. Mystery of Chess Boxing

Happy Birthday!!!!!!!!!!!

Unlike you my "pole" requires 2 hands!!!!

Have a GREAT birthday!!!

Bio, what happenned to that beautiful head of hair you had as a child.

Happy Birthday folks..

Happy Birthday! All The Best rexbowan!

Happy Birthday and have a great day

They are regulated with a Regulator/Rectifier that is bolted to the bearing plate under the rear gen head cover. I still wouldn't use it with anything that has Modern Electronics in it though without having someone go though it. I had to buy a cheap but decent multi-meter to get mine usable after it sat unused for so long. It was running @ 147v and over 70hz before I replaced 1 60 year old blown Capacitor and did a few adjustments on the governor to get it to hold a steady load @60hz with 2 older 1500W space heaters acting as load banks. Mine is 115v 230v 60hz 3500w genny. It will easily run a 3000W load but once you dump the load off, it runs a little high @ 117V 63hz until the Conserv-er pulls the throttle down to an idle. Works for a backup power for lights and the blower on the wood furnace. That's what I use it for when the power goes out. I'm sure that if I replace the other capacitor that it could run a Microwave or Refrigerator without blowing up components. Wouldn't trust it to run my PC though No Way lol. lol @TheLastColdBeer mine has a box on it as well (it's like being Mooned eh?) but it pulls the throttle on the carb instead of the Governor arm. Looks like someone was "tweaking" the plate a little. Anywho they are really neat to see and work on. Check this Youtube channel out. Mike helped me find a couple Capacitors and get mine setup and Load Bank tested without having any Fancy Hi-Tech equipment. I talked with him back and forth Via Email for a couple weeks to track down a few parts. Come to find out that his shop is pretty close to where my brother lives. He's got some really decent and some really huge stuff in his "collection" He is a full time Emergency / Stand-By power generation technician by trade. https://www.youtube.com/user/SmallEngineMechanic/videos

The old K-model Kohlers had external points & condensers, very nice to work on. If you treated them nice, they almost never needed attention. The solenoid is an electromagnet. Attracts a steel plate attached to the governor. Had to rev up the hand drill numerous times just to watch the plate swing back & forth. Fun for all ages.

Should be Magneto Ignition under the flywheel and Points under the cover near the Cam Cover on those. A little hard to find Magnetos for if it does not have spark but I've converted them to run aftermarket Tecumseh Mags. Tecumseh 30560a works well with a new condenser. Old K161 Mag Old K161 with Tecumseh 30560a Mag.

Engine will need the Crankshaft replaced to be usable on anything but that genny. The crank will be short and Specifically Tapered for that particular gen head. I can get you part numbers for a K141/K160/K161 Std journal 1" x 3.75" Crankshaft if you are interested. If you want Easiest way to pop the Stator/Commutator off. Pump 5-7 pumps of Grease in the bolt hole and push the bolt back in until it contacts the grease. Then Hit the end of the bolt square on the head with a Heavy Hammer 3-4 times. The Hydraulic Pressure of the Grease compressing will force it to release from the Taper. I'm a small engine mechanic and I've had my ESA (Engine Service Association) Certification for over 30 years. I try to know my shit when it comes to small engines. Here are crankshaft specs from 1 of my binders. Sorry it's kinda washed out I'm inside with the sun coming through the window lol. I'll get you a better copy if you want.

My minds picture of @RobMc

Happy Birthday!

I would like to take this opportunity to say how I appreciate Yack as an admin, you do an outstanding job, and thank you for all your kindness and competence and for being a great guy. Actually, I'd like to thank ALL the admins for their great work keeping the servers running well and fairly and nicely. BIG HUG! Now get back in those maps soldiers!

Nice find, they don't make them like that anymore! Did you have to pull the flywheel to get to the points? As they say, one man's junk is another mans treasure!

Thank you all

just trying to get my post count up lol!

You have no life!

Haha thanks for reminding everyone that I am a great player who excels in dying. I've tried several times to find people online but so far the COD2 DM server has been empty. Will keep trying

Happy Birthday!

I've suddenly remembered isn't it you who lives on a barge? There is in that case one important thing to check, the suction side to the p/p, especially if it hasn't been checked for a while. Ships and boats suck in water through a thing called a strum box, this usually has a filter fitted and must be clear. The diameter of the pipe must be sufficient to let the pump suck up enough water and not cavitate. In addition as it is on the dirty side over time it builds up with growth and restricts the flow, both these are the starting points of your check. In simple terms it is useless having a p/p that can give say 40 litres per minute if it can only suck 20. If the boat is old and this is a retrofit it may not be correctly plumbed in.

I am pleased to be accepted as a member of XI, and happily accept the invitation. Thanks to the admins who sponsored me and to all the members who supported me. My 2 years as a player has been great and being a member just makes it that much better. (Besides my wife says, that considering the name of the Clan, I am now right where I belong.) Thanks again for the honor.

New rotation maps are map mp_1078carentan map mp_82ab_richemont map mp_akushima map mp_alcazaba map mp_algiers map mp_barracks map mp_burma map mp_camp_merc map mp_dugin map mp_get_lost_3 map mp_jsvacant map mp_jungle map mp_kneeriver map mp_konigsberg map mp_maquina map mp_opcenter map mp_shallowgrave map mp_stanjel

Thanks Skuz!

Hi Skuz - appears COD 5 OW is stuck on mp_1078carentan ... thanks E

Rotation #81 24 maps by ShadyBrady put in rotation 07/16/22 by Pengy map mp_forlorn map mp_psycho_day map mp_printery map mp_kabul map mp_asylum map mp_rasalem map mp_overpass map mp_fabrika map mp_bloc map mp_prisonblock map mp_meanstreet2 map mp_pic map mp_uprise map mp_blue_country map mp_skidrow map mp_novoutpost2 map mp_strike map mp_lumberyard map mp_hk2 map mp_hip map mp_northport map mp_roundup_day map mp_mirage_b3 map mp_wallendar_4 Server restarted @ 9:29 a.m. EDT by Pengy Enjoy!