All Activity

Smeggie is correct will have issue if not follow or match battery and charger spec's is a miss match of fire or boom.

to check chain stretch need to degree valves open / close events to crankshaft degree mark, or remove chain to check slack on flat suface by push / pull chain. get a shop manual for engine

strange that post removed or not make it dam AI protecting the sleezy about that frame was arc-welded when rest of bike was mig welded after was in a T-bone collusion for the rear right foot peg support tube was replaced for noticed arc-stick weld after purchase and Rob ment bent frame is not to factory jig spec's for the bike had a issue of turn radius wasn't the same when turning as left was longer than right was shorter when making turns for frame was .375 inch offset by the water test, great for right turn oval track. Legi yes change oil offen and can do a oil analysis to see how much metal in the oil and chain guide material, if a lot need to flush the oil cooler out. drive chain had worn the spockets thickness from side tracking due to miss alignment

I grew up on Japanese bikes. Starting on a honda qa-50 in kindergarten. To my last which was a suzuki gsxr-750 in my late 40's. Never had or rode a bmw. But if they are like Japanese models, then check all gaskets for signs of leaks or gasket replacement. Especially in hard to see places. Hondas in the 80's and 90's head and valve cover gaskets were notoriously leaky. Well if you rode hard, they were. And i would run the piss out of them. Just look for signs of baked oil stains on the motor. The bike pictured looks like it needs rode hard. . So i would ask to see behind the plastic !!! I quit ridding due to fuckin crazy ass drivers in cars. My daughter's boyfriend has a Hayabusa he said I can ride. Maybe at a race track. But not on the street.

Rotation #3a 20 maps put in rotation 10/19/25 by Pengy map mp_cod4malta map mp_compact map mp_crownfortv2 map mp_cuf_scifi map mp_de_nuke map mp_uphill map mp_depot_n_b1 map mp_desert_dock_2 map mp_factory map mp_foxhunt_ruins map mp_fr_pv1 map mp_gb_bunker_b1 map mp_graveyard map mp_harps_hood map mp_i2 map mp_impound map mp_japmap map mp_matroska map mp_modernbacklot map mp_nuke Server restarted @ 8'23 p.m. EDT by Pengy Enjoy!

Just finished building a new computer to go to W11. Have two optical drives in my W10 box. For the W11 box bought an external optical drive CD/DVD/Bluray - R/W. Connects via USB - works great.

Well in theory chains should last the life of the engine, that's why they are used instead of belts, but in real life they do stretch, and tensioners do fail. I have not owned any of these engines, so have no practical experience of them. By nature motorcycle engines are highly stressed, they require oil changes at more frequent intervals than car engines. It may sound excessive but I used to change the oil every 1000-1500 miles, this helps prevent things such as cam chain tensioners working off oil pressure failing early. I do know from friends that these are good engines and give very little trouble, so I'd base my maintenance on how you use them. So assuming you're not racing or crossing the world your cam chains should be lasting at least 50,000 miles without stretching under normal use and same for the tensioners. By now they've been out long enough for there to be plenty of data and feedback from owners for reliability. Caution, remember most people only report when things are wrong, rarely when they're right, don't be scared by some reports. With chains there is always a slight rattle when cold, but this rattle should go at operating temps, people often confuse clutch rattle with timing chain rattle. So to answer your question about the chain tensioner and chain, remembering in theory the chain should last a long time:- 1/. Excessive noise change the tensioner 2/. If that doesn't work change the chain BUT don't forget noise can come from failing bearings, clutch and other engine parts, there should be a way of measuring chain stretch and when to change it. As it's the XR not the RR the engine produces less bhp and is not as stressed, which would be my personal choice of engine.

Install the game, COD 4 MW, on the new computer. Copy your game's entire folder and overwrite the one in your new computer. You can use your 1TB drive to transfer from one PC to the other. This is the easiest solution. All the downloaded maps will be copied over as well. EA will take care of BF4 installation. You don't need HLSW the favorite servers will be copied over as well.

I know that on BMW you can hear the chain in the engine . There is , for example , a chain tensioner on the right side under the radiator that can loosen and work on oil pressure , and it is changed when you hear the chain ! Is that same chain changed and at What mileage ?

Looks like a good time on a beautiful day. A flight of Maker's Mark is a bonus!

Thanks for the advice guys I plan to do the services myself ( minor services ) for that I bought a special cable and OBDLink to check errors and original kilometers

Rob also the same arc degree left or right will show the rear axle alignment issue (offset from crown to rear swing arm) a twist in neck would be not safe at high speeds for dosen't track free, straight line for handle bar correction is needed for straight line, @ high speed you have a wobble problem. meaning that same handle bar angle right or left turn, turn arc of bike isn't same reaction of turning radius.

Thank you Skuz!

Thank you Skuz!

Happy Birthday Rookie!

If the frame was that bent it wouldn't be rideable, this is a test for wheel alignment, especially chain drive. Frames normally bend at the headstock so examine that area for damage, you can actually see this if you're sitting on the bike in most cases, and bearings may be rough when bars turned. These bikes have a very strong cast alloy twin spar construction, personally I would prefer this model than the RR.

used motorcycles got to do the water test for checking frame is not bent by slowing ryding straight thought a water puddle and when passes over it and look after the marks on the ground of front and rear wheels are on top of each other gets a ago a head an buy, other check if bike was warmed up before test ride is hiding issues