Labob Posted February 4, 2018 Member ID: 42 Group: *** Clan Members Followers: 50 Topic Count: 338 Topics Per Day: 0.06 Content Count: 8389 Content Per Day: 1.47 Reputation: 6126 Achievement Points: 54468 Solved Content: 0 Days Won: 13 Joined: 09/01/09 Status: Offline Last Seen: April 22 Birthday: 01/30/1959 Device: Windows Posted February 4, 2018 So I'm outa ideas and before I go yell at asus I need to know I've tried everything possible so I do not come out smelling like poo poo. So my machine has been doing stuiped shit for a long time I could not figure that out so I built a new one last one was old. Mb is an ROG B350-F (asus) Installed 16 GB of HyperX 2133 Everything is working good its fast have not tried to compile anything yet so I do not know if the little bugs are gone but that's another story.What my issue is here is my memory and if its a windows issue or a MB issue. Right now I'm going MB. So I've done the usual cleared the bios updated the bios check each stick one at a time 2 at a time and all 4 at the same time. Each test only gave out half of what the memory was ie 4 gb said 2 held in reserve ect ect . On the windows side I've done the regedit hacks, in System control under boot/advanced options uncheck max mem I've tried everything I could think of or find. Now what I can show you. So the bios does show 4 sticks of 4 GB at 2133 Here though it saying only 8 Gb And in windows it sees all 4 sticks. But says its holding 8.1 in reserve I don't get that Any way any ideas crazy out of the box ideas I will try all I want is 16 GB and no problems with this build friggen bad choice for a MB I think Thank you all ME Awards
2_MANY_BEERS Posted February 4, 2018 Member ID: 96 Group: ** Registered Users Followers: 108 Topic Count: 1049 Topics Per Day: 0.18 Content Count: 8817 Content Per Day: 1.54 Reputation: 3309 Achievement Points: 62219 Solved Content: 0 Days Won: 5 Joined: 09/02/09 Status: Offline Last Seen: April 19 Birthday: 06/30/1954 Device: Windows Posted February 4, 2018 @fbi_open_up might be able to help you.
Angelz Posted February 4, 2018 Member ID: 24295 Group: **- Inactive Registered Users Followers: 11 Topic Count: 272 Topics Per Day: 0.08 Content Count: 2311 Content Per Day: 0.69 Reputation: 2829 Achievement Points: 20239 Solved Content: 0 Days Won: 17 Joined: 03/27/16 Status: Offline Last Seen: January 2, 2021 Posted February 4, 2018 (edited) Is your memory compatible with the motherboard? I do not see HyperX on the list below. Here is a link to all the memory that is compatible for your motherboard: http://dlcdnet.asus.com/pub/ASUS/mb/SocketAM4/STRIX_B350-F_GAMING/ROG-STRIX-B350-F-GAMING_Memory_QVL_180125.pdf Edited February 4, 2018 by Angelz L!ckALotAPus and KicknDatAzz 2
loaderXI Posted February 4, 2018 Member ID: 252 Group: +++ COD2 Head Admin Followers: 72 Topic Count: 396 Topics Per Day: 0.07 Content Count: 6438 Content Per Day: 1.13 Reputation: 6581 Achievement Points: 54654 Solved Content: 0 Days Won: 32 Joined: 09/05/09 Status: Offline Last Seen: April 27 Birthday: 03/22/1965 Device: Windows Posted February 4, 2018 Try G-Skill as it is recommended for Asus boards as far as I know used it on mine and never had a problem Angelz 1 Awards
J3st3r Posted February 5, 2018 Member ID: 2162 Group: ++ COD4 Admin Followers: 153 Topic Count: 152 Topics Per Day: 0.03 Content Count: 5223 Content Per Day: 1.00 Reputation: 5172 Achievement Points: 45911 Solved Content: 0 Days Won: 24 Joined: 01/25/11 Status: Offline Last Seen: Friday at 08:03 AM Birthday: 02/26/1972 Device: Windows Posted February 5, 2018 (edited) Several problems and solutions that I have learned over the years. CPU not properly seated will do that. It might see all 16gb of memory but only use a portion of it. When I build a New PC I put the CPU in the socket and clamp it down. Then take it back out and clamp it back down. I'll do this a couple times before I put my thermal paste on and bolt down the cooler. Lightly press down on the CPU while you lock it down the last time. AMDs memory controller is on the CPU so if it's not seated correctly it will cause all types of problems. 1st gen socket 939 and AM2 were notorious for not seating the 1st couple times. You could not just pop it in and go unless you were really lucky lol. Motherboard could have a faulty memory channel. I've had to RMA quite a few mid priced motherboards lately for PCs that I have built for people. CPU could be faulty but that rarely happens these days. Memory compatibility should Not be the issue since you are running the correct speed of memory for the motherboard and that memory is 1.2v. If memory voltage is higher than 1.5v you have to set the voltage up manually. You have Bios Version 3803 which is the latest version. Here is what I would do if you still have problems after Re-Seating the CPU. This is going to take hours but it's the only way to test both the memory and motherboard. This is your motherboard. I marked Channel 1 in Blue and Channel 2 in Orange. Step 1. Install 2 memory modules in channel 1 and load into windows and run Windows Memory diagnostics. Click Start, type mdsched.exe in the Search box, and then press Enter. Choose whether to restart the computer and run the tool immediately or schedule the tool to run at the next restart. Let it run untill it's completely done. If errors are displayed Replace memory. Step 2. Pull those out and put the other 2 in channel 1 and test again. Step 3. If no errors were detected Repeat the tests above on Channel 2 If you get errors in 1 channel and not the other you will have to RMA the motherboard. I know it sucks testing 4 sticks of memory in 4 different slots because it takes forever but that's the only way to test all 4 memory modules and all 4 memory slots. Hope this helps. Edited February 5, 2018 by J3st3rXI XjCrAzY, Labob, deerejon and 3 others 6 Awards
Labob Posted February 5, 2018 Member ID: 42 Group: *** Clan Members Followers: 50 Topic Count: 338 Topics Per Day: 0.06 Content Count: 8389 Content Per Day: 1.47 Reputation: 6126 Achievement Points: 54468 Solved Content: 0 Days Won: 13 Joined: 09/01/09 Status: Offline Last Seen: April 22 Birthday: 01/30/1959 Device: Windows Author Posted February 5, 2018 Quote Is your memory compatible with the motherboard? I do not see HyperX on the list below Yes it is they do a bad job of keeping track of there paper work lol I will give it a try J3st3rXI thanks its a different path and one never knows Awards
KaptCrunch Posted February 6, 2018 Member ID: 389 Group: *** Clan Members Followers: 48 Topic Count: 316 Topics Per Day: 0.06 Content Count: 4882 Content Per Day: 0.85 Reputation: 4067 Achievement Points: 39498 Solved Content: 0 Days Won: 51 Joined: 09/14/09 Status: Offline Last Seen: 14 hours ago Birthday: 01/01/1970 Device: Windows Posted February 6, 2018 (edited) AMD Ryzen™ Processors 4 x DIMM, Max. 64GB, DDR4 3200(O.C.)/2933(O.C.)/2666/2400/2133 MHz ECC and non-ECC, Un-buffered Memory * AMD 7th Generation A-series/Athlon™ Processors 4 x DIMM, Max. 64GB, DDR4 2400/2133 MHz Non-ECC, Un-buffered Memory * Dual Channel Memory Architecture * Hyper DIMM support is subject to the physical characteristics of individual CPUs. * Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists). Graphic Integrated AMD Radeon™ R Series Graphics in the 7th Generation A-Series APU Multi-VGA output support : HDMI/DisplayPort ports - Supports HDMI 1.4b with max. resolution 4096 x 2160 @ 24 Hz / 2560 x 1600 @ 60 Hz - Supports DisplayPort 1.2 with max. resolution 4096 x 2160 @ 60 Hz Maximum shared memory of 2048 MB I'm with jester bad cpu or mounting (bent pin) issue for not seen all ram what cpu have bob AMD Ryzen™ 3 PRO 1300 ? the rez ram can be for onboard graphics other is wait out for a new bios from Asus Edited February 6, 2018 by KaptCrunch Awards
KaptCrunch Posted February 6, 2018 Member ID: 389 Group: *** Clan Members Followers: 48 Topic Count: 316 Topics Per Day: 0.06 Content Count: 4882 Content Per Day: 0.85 Reputation: 4067 Achievement Points: 39498 Solved Content: 0 Days Won: 51 Joined: 09/14/09 Status: Offline Last Seen: 14 hours ago Birthday: 01/01/1970 Device: Windows Posted February 6, 2018 switch to Predator DDR4 ram of tuned for amd Savage, FURY modules are tuned for Intel L!ckALotAPus 1 Awards
Labob Posted February 6, 2018 Member ID: 42 Group: *** Clan Members Followers: 50 Topic Count: 338 Topics Per Day: 0.06 Content Count: 8389 Content Per Day: 1.47 Reputation: 6126 Achievement Points: 54468 Solved Content: 0 Days Won: 13 Joined: 09/01/09 Status: Offline Last Seen: April 22 Birthday: 01/30/1959 Device: Windows Author Posted February 6, 2018 Well I'm not dropping another 250 for ram so for now this is it Fine tuning ram right down to what they say is the absolute perfect ram for that cpu is all good and fun for some real serious gaming but I was just trying to build a good working rig. I tried all the combos and it all came back good I tried it with memtest as well as mdschek.exe . I tried cpu-z and found this ? I wonder if its all cut in half because the frequency is cut in half ???? I checked in the bios and it is set at 2133 which is double of what cpu-z sees . Awards
KaptCrunch Posted February 7, 2018 Member ID: 389 Group: *** Clan Members Followers: 48 Topic Count: 316 Topics Per Day: 0.06 Content Count: 4882 Content Per Day: 0.85 Reputation: 4067 Achievement Points: 39498 Solved Content: 0 Days Won: 51 Joined: 09/14/09 Status: Offline Last Seen: 14 hours ago Birthday: 01/01/1970 Device: Windows Posted February 7, 2018 just wait for next bios update Asus took me for 3months ride on a new x99 board to correct ram issues awhile back I'm sure it will get fixed Bob Awards
Labob Posted February 7, 2018 Member ID: 42 Group: *** Clan Members Followers: 50 Topic Count: 338 Topics Per Day: 0.06 Content Count: 8389 Content Per Day: 1.47 Reputation: 6126 Achievement Points: 54468 Solved Content: 0 Days Won: 13 Joined: 09/01/09 Status: Offline Last Seen: April 22 Birthday: 01/30/1959 Device: Windows Author Posted February 7, 2018 So lets see I have a repair ticket into bell canada I'm watching the repair ticket to activision so sad those Grrrr I'll send one off to asus too now I'm a cop I'm writing tickets up like there were candy L!ckALotAPus and Angelz 1 1 Awards
Labob Posted February 7, 2018 Member ID: 42 Group: *** Clan Members Followers: 50 Topic Count: 338 Topics Per Day: 0.06 Content Count: 8389 Content Per Day: 1.47 Reputation: 6126 Achievement Points: 54468 Solved Content: 0 Days Won: 13 Joined: 09/01/09 Status: Offline Last Seen: April 22 Birthday: 01/30/1959 Device: Windows Author Posted February 7, 2018 I suppose if I have to I will wait lol Awards
fbi_open_up Posted February 8, 2018 Member ID: 3143 Group: ***- Inactive Clan Members Followers: 10 Topic Count: 62 Topics Per Day: 0.01 Content Count: 261 Content Per Day: 0.05 Reputation: 207 Achievement Points: 2585 Solved Content: 0 Days Won: 0 Joined: 01/19/12 Status: Offline Last Seen: February 27, 2024 Birthday: 08/14/1961 Posted February 8, 2018 I work on computers all day, I have seem similar problems with bad chips not seeing all the ram., try another cpu if you can. L!ckALotAPus 1 Awards
KicknDatAzz Posted February 8, 2018 Member ID: 833 Group: *** Clan Members Followers: 41 Topic Count: 49 Topics Per Day: 0.01 Content Count: 769 Content Per Day: 0.14 Reputation: 598 Achievement Points: 5724 Solved Content: 0 Days Won: 0 Joined: 12/04/09 Status: Offline Last Seen: Thursday at 04:39 PM Device: Windows Posted February 8, 2018 Fuck ASUS!!! I said this long ago when I had issues with a BRAND NEW BOARD and all they wanted to do was send me a REFURB and hold money on my Credit card until they got the faulty one back. Shitheels. Their support SUCKS and they honestly don't give a flying fuckhole about me or you. They think they have us by the short and curlies but the other option is to get a better board from elsewhere. Never again, Asus, never again. Oh, and the replacement MSI board I installed went in smooth as silk, no issues and runs like a champ, even with a Win7 install on it (where the ASUS wouldn't work - their suggestionn was to install Windows 10 - FU!) Overclocking is also better on my MSI. Angelz and L!ckALotAPus 1 1 Awards
Labob Posted February 8, 2018 Member ID: 42 Group: *** Clan Members Followers: 50 Topic Count: 338 Topics Per Day: 0.06 Content Count: 8389 Content Per Day: 1.47 Reputation: 6126 Achievement Points: 54468 Solved Content: 0 Days Won: 13 Joined: 09/01/09 Status: Offline Last Seen: April 22 Birthday: 01/30/1959 Device: Windows Author Posted February 8, 2018 See that the thing I've always had great asus boards all my old ones are in the kids houses running plex servers and one is real old two. Same goes for kingston ram I've never had a problem so I went with the ones I know . I'll be honest here though I've always went business class on my MB this time I decided to go fancy and this happens . The one I pulled out of this build was running ddr 2 mem that old and the only reason to change was I wanted ssd support . O well live and learn we all have our lessons grrrrr KicknDatAzz 1 Awards
L!ckALotAPus Posted February 8, 2018 Member ID: 21216 Group: **- Inactive Registered Users Followers: 20 Topic Count: 33 Topics Per Day: 0.01 Content Count: 1695 Content Per Day: 0.43 Reputation: 1732 Achievement Points: 15803 Solved Content: 0 Days Won: 0 Joined: 07/15/14 Status: Offline Last Seen: January 8, 2020 Birthday: 02/09/1966 Posted February 8, 2018 I wish XFX made mother boards they are awesome when it comes to RMAs KicknDatAzz 1
Angelz Posted February 8, 2018 Member ID: 24295 Group: **- Inactive Registered Users Followers: 11 Topic Count: 272 Topics Per Day: 0.08 Content Count: 2311 Content Per Day: 0.69 Reputation: 2829 Achievement Points: 20239 Solved Content: 0 Days Won: 17 Joined: 03/27/16 Status: Offline Last Seen: January 2, 2021 Posted February 8, 2018 I will only trust G-Skill ram in any of my pc's. Right now I am using G.SKILL Trident Z Series 16GB DDR4 3200 and never any probs. My motherboard is a GIGABYTE GA-AB350-Gaming 3 and no probs. My cpu is a AMD Ryzen 7 1700 Eight-Core and no probs. My monitor, sound card, dvd and blu ray players are all asus and no probs with any of them. Had an issue with the software on my blu ray and asus sent me a cd of the new one. Been great ever since. I am using and will always use w7 ultimate. Coz I think everyone knows I will never ever ever put w10 in any of my pc's.
Angelz Posted February 8, 2018 Member ID: 24295 Group: **- Inactive Registered Users Followers: 11 Topic Count: 272 Topics Per Day: 0.08 Content Count: 2311 Content Per Day: 0.69 Reputation: 2829 Achievement Points: 20239 Solved Content: 0 Days Won: 17 Joined: 03/27/16 Status: Offline Last Seen: January 2, 2021 Posted February 8, 2018 (edited) On 2/6/2018 at 10:28 AM, Labob said: Well I'm not dropping another 250 for ram so for now this is it So I was right, it was your ram..... neener neener Jester I am just kidding. Edited February 8, 2018 by Angelz
Labob Posted February 9, 2018 Member ID: 42 Group: *** Clan Members Followers: 50 Topic Count: 338 Topics Per Day: 0.06 Content Count: 8389 Content Per Day: 1.47 Reputation: 6126 Achievement Points: 54468 Solved Content: 0 Days Won: 13 Joined: 09/01/09 Status: Offline Last Seen: April 22 Birthday: 01/30/1959 Device: Windows Author Posted February 9, 2018 rama rama ding dong Awards
KaptCrunch Posted February 19, 2018 Member ID: 389 Group: *** Clan Members Followers: 48 Topic Count: 316 Topics Per Day: 0.06 Content Count: 4882 Content Per Day: 0.85 Reputation: 4067 Achievement Points: 39498 Solved Content: 0 Days Won: 51 Joined: 09/14/09 Status: Offline Last Seen: 14 hours ago Birthday: 01/01/1970 Device: Windows Posted February 19, 2018 (edited) LaBob Advance bios try this timings in bios in dram settings 16-17-17-36 refers to a tCL of 16, tRCD of 17, tRP of 17, and tRAS of 36. that amd's numbers i see bios update Version 3803 2018/01/26 microcode, oop's see that you got that version Edited February 19, 2018 by KaptCrunch Labob 1 Awards
Recommended Posts